HS code-driven compliance workflows

List of the catalogue of this article:

• 1,HS code-driven compliance workflows How to deal with the wading fault light on
• 2, What is the reason for the engine shaking after the vehicle wading
• 3. How long can the engine be driven when it enters water
• 4, What problems are prone to occur after the car wading

How to deal with the wading fault light

This situation may be damaged by the electronic system around the engine. You should go to the 4s store immediately after it happens. Find professional and technical personnel to read the fault code. The fault code can help technicians quickly find the fault part and the car. It is very important to read the fault code.

If this happens, the electronic system around the engine may be damaged. After this happens, you should immediately go to the 4s store to find a professional technician to read the fault code. The fault code can help the technician quickly find the fault site and the cause of the fault. When repairing a car, it is very important to read the fault code.

It needs to be cleaned immediately. If it is not cleaned immediately, it will also cause a musty smell in the car. If the fault light is on and the vehicle cannot run normally, that is, water enters the engine, the oil quality will deteriorate, the wear of engine parts will accelerate, and there will be noise or abnormal shaking and vibration when the car is running.

What is the reason for the engine shaking after the vehicle wading in water

is caused by the water in the engine. The water enters the engine from the air filter of the engine, resulting in an increase in the intake resistance. There is moisture in the combustion chamber, which causes the engine ignition system to work abnormally and the fire cannot be normal. Ignite, causing problems.

The reasons for jitter after wading in water are: engine electrical components wiring harness, etc., the signal is lost or distorted due to water inlet, resulting in the jitter of the engine.During the repair, check and confirm the faulty components, and process and replace them to eliminate them.

[Pacific Automobile Network] The reason why the car shakes a lot after driving through the stagnant water: because when the car is wading in the water, the high-voltage line enters a small amount of water, resulting in poor ignition. Because the high pressure of the spark plug is supplied to the engine body, it feels that the car shakes a lot.

The engine shakes after wading in water is because a small amount of water enters the high-voltage line when the car enters water, and the engine air filter element is submerged in water, resulting in an increase in the intake resistance and water entering the combustion chamber, resulting in poor operation of the ignition system. In serious cases, the spark plug cannot be ignited, and the car will even turn off.

The vehicle wades in the water and shakes, and must not be driven again. Go to the maintenance institution for examination and treatment as soon as possible to find out the cause of the vehicle shaking and eliminate it. The reasons for shaking after wading are as follows: 1.The wiring harness of the electrical components of the engine, etc., because the water inlet affects the loss or distortion of the signal, which in turn affects the vibration of the engine.

How long can the engine be driven when the engine is flooded

1. Even if you can drive, it doesn't necessarily mean that nothing happens. Generally, the engine cannot run when water enters, and oil and transmission water can also run, but it is very dangerous. Please be sure to check after going into the water. It can be repaired and run.

2. How long can the engine be driven when the water enters? It is best not to start the engine after the water enters. The second start is easy to cause damage to the internal parts of the engine, such as the piston connecting rod, valve, etc.

3. Finally, if the engine is slightly flooded, the vehicle can still run normally, but it needs to be repaired by a professional repair shop as soon as possible.Because even if the water intake is relatively small, it will affect the performance of the vehicle, such as unstable acceleration, power loss and other problems.

4. It's best not to start the engine after water enters. After the engine enters the water, turn off the engine as soon as possible and call the rescue number to wait for rescue. It is strictly forbidden to restart and continue driving to avoid unnecessary losses. If the engine is damaged due to the second start-up, the insurance company will not settle the claim.

What problems are prone to occur after the car wading

The engine may not work normally. After wading, the engine of the car may not work normally, the circuit board may be damaged, and the oil and water in the engine circuit may Mixed together, the engine cannot run normally.

After the car wadingWhat problems are prone to occur? After the car wading in the water, various parts of the car may be damaged to varying degrees. The most common problems include damage to the gearbox, excessive wear inside the engine, moldy internal parts of the vehicle, abnormal use of electronic functions, and rusting of motor vehicle parts.

The residual moisture after the vehicle wading in the water will make the brake disc and brake pads unable to fully rub, causing the car to lose braking power. On rainy days, the water on the road is relatively dirty, and there will be fallen leaves and other debris. When the vehicle wades in the water, these debris are easy to attach to the gaps in the chassis and other places, which will make the chassis rust over time.

The residual moisture after the vehicle wading in the water will make the brake disc and brake pads unable to fully rub, causing the car to lose braking power. There are many wire harnesses and circuits in the engine compartment. When the vehicle wades in the water, it is likely to wet the interface of the wire harness.If the wire harness interface is found to be wet, it needs to be dried immediately to avoid short circuit.