1. Another reason is that the throttle valve has failed. The above two problems will cause engine shaking and unstable speed.
2. If the oil is not replaced on schedule/the viscosity of the oil is too high. As we all know, the engine is not allowed to have excessive oil viscosity under cold start or low temperature operation; and the engine is not allowed to be too low when the engine is fully warmed to the normal operating temperature.
3. Unstable idle speed is manifested as: when idling, the engine trembles and the speed is uneven. The causes are: blockage of the idle air measuring hole, poor operation of the idle device, weak sparks of individual cylinder spark plugs, loose sealing of individual valves, leakage of air intake manifolds, too early or too late ignition time, improper idling adjustment, etc.
4. Reason 2: The battery loses power. The battery has a certain service life. If the battery has been used for a long time, the initial starting voltage will be low, causing the body to shake. Tips: Clean the battery frequently and replenish the electrolyte. Reason 3: Low fuel quality. In irregular gas stations, the fuel quality is not guaranteed, resulting in insufficient power.
1. The quality of the Foton Monpark 486 engine is very good. Foton Monpark's 486 engine is a medium and low-speed high-power engine, which adopts international leading technology and supporting equipment, with the characteristics of high reliability, strong durability and good fuel economy.
2. The Monpaque models have three engines, the 0l and 4l Monpaque models are gasoline engines, and the Monpaque models equipped with 25T turbocharged diesel engines.
3. The Foton Monpark engine is a domestic Mitsubishi engine. The Foton Monpark engine uses the domestic Mitsubishi 4g63 0-displacement engine and the 4g69s4m 4-displacement engine respectively.
4. The parameter configuration is as follows: Foton Monpark is a light passenger-level model, using gasoline as the energy type, which meets the environmental protection standards of national IV/national V.Equipped with a 0L naturally aspirated engine, the maximum power is 90kW and the maximum torque is 165N·m.
5. Hello! The Foton Monpark Diesel Version Is Equipped With A Cummins ISF8 Engine, With Strong Power, A Power Of Up To 96kW, A Torque Of 280Nm, Low Fuel Consumption And Low Noise, 20,000 Kilometers Of Maintenance, 500,000 Kilometers Without Major Repair.
6. The 8-liter engine of Monpaques is a turbocharged diesel engine. The maximum power of this engine is 96kw and the maximum torque is 280 Nm. The maximum power speed of this engine is 3600 rpm, and the maximum torque speed is 1400 to 3000 rpm. Clock. This engine is equipped with in-cylinder direct injection technology.
Monpaque is of good quality. Make sure that the tire pressure is correct. Change to fuel-efficient tires. Don't change the size of the tire at will. Regularly check whether your driving disc and tires are right. Use the smoothing oil with the lowest viscosity. Maintain the engine well and fix it immediately if there is a problem. Take good care of the car body. Don't believe the saying that the higher the octane number of gasoline, the better.
I fell in love with this car at a glance at that time. I valued the appearance and space of the car. This car is not only in appearance, but also more suitable for my daily use of carrying goods and people in all aspects. It is cost-effective, and the space is large. It is not a problem to load general goods. The chassis is stable and the controllability is very good.
Foton Monpark engine must be familiar to everyone with Cummins. It has strong power and stable operation, long service life and fuel-saving! The noise and vibration of this car are also very small, and it is very smooth to drive. As we all know, Foton and Mercedes-Benz have a joint venture commercial vehicle project. The technology used is based on Mercedes-Benz, and the quality is also very reliable.
This car was launched relatively late, and the market holdings were not very high, but we have a lot of Kaimeng Pike. The VVT engine is technically mature and quite fuel-efficient.Repair and maintenance are not expensive. If you want to load a lot, it is recommended to use 4. Mine is 4. Usually, it is easy to run with two tons.
Mine is Monpaque E. At that time, I bought this car because I liked the fashionable appearance of the car, and I felt that the Monpaque was relatively large in the seven-seater car. After testing the 0L engine, it was also quite powerful, so I bought it directly. Now I have been driving it for more than half a year, and I feel that this car is particularly adaptable.
Compared with Monpaque E, I personally think Lingzhi is relatively better, because Lingzhi has a relatively large holding capacity and has a relative advantage in terms of car maintenance convenience.
Global trade data for PESTEL analysis-APP, download it now, new users will receive a novice gift pack.
1. Another reason is that the throttle valve has failed. The above two problems will cause engine shaking and unstable speed.
2. If the oil is not replaced on schedule/the viscosity of the oil is too high. As we all know, the engine is not allowed to have excessive oil viscosity under cold start or low temperature operation; and the engine is not allowed to be too low when the engine is fully warmed to the normal operating temperature.
3. Unstable idle speed is manifested as: when idling, the engine trembles and the speed is uneven. The causes are: blockage of the idle air measuring hole, poor operation of the idle device, weak sparks of individual cylinder spark plugs, loose sealing of individual valves, leakage of air intake manifolds, too early or too late ignition time, improper idling adjustment, etc.
4. Reason 2: The battery loses power. The battery has a certain service life. If the battery has been used for a long time, the initial starting voltage will be low, causing the body to shake. Tips: Clean the battery frequently and replenish the electrolyte. Reason 3: Low fuel quality. In irregular gas stations, the fuel quality is not guaranteed, resulting in insufficient power.
1. The quality of the Foton Monpark 486 engine is very good. Foton Monpark's 486 engine is a medium and low-speed high-power engine, which adopts international leading technology and supporting equipment, with the characteristics of high reliability, strong durability and good fuel economy.
2. The Monpaque models have three engines, the 0l and 4l Monpaque models are gasoline engines, and the Monpaque models equipped with 25T turbocharged diesel engines.
3. The Foton Monpark engine is a domestic Mitsubishi engine. The Foton Monpark engine uses the domestic Mitsubishi 4g63 0-displacement engine and the 4g69s4m 4-displacement engine respectively.
4. The parameter configuration is as follows: Foton Monpark is a light passenger-level model, using gasoline as the energy type, which meets the environmental protection standards of national IV/national V.Equipped with a 0L naturally aspirated engine, the maximum power is 90kW and the maximum torque is 165N·m.
5. Hello! The Foton Monpark Diesel Version Is Equipped With A Cummins ISF8 Engine, With Strong Power, A Power Of Up To 96kW, A Torque Of 280Nm, Low Fuel Consumption And Low Noise, 20,000 Kilometers Of Maintenance, 500,000 Kilometers Without Major Repair.
6. The 8-liter engine of Monpaques is a turbocharged diesel engine. The maximum power of this engine is 96kw and the maximum torque is 280 Nm. The maximum power speed of this engine is 3600 rpm, and the maximum torque speed is 1400 to 3000 rpm. Clock. This engine is equipped with in-cylinder direct injection technology.
Monpaque is of good quality. Make sure that the tire pressure is correct. Change to fuel-efficient tires. Don't change the size of the tire at will. Regularly check whether your driving disc and tires are right. Use the smoothing oil with the lowest viscosity. Maintain the engine well and fix it immediately if there is a problem. Take good care of the car body. Don't believe the saying that the higher the octane number of gasoline, the better.
I fell in love with this car at a glance at that time. I valued the appearance and space of the car. This car is not only in appearance, but also more suitable for my daily use of carrying goods and people in all aspects. It is cost-effective, and the space is large. It is not a problem to load general goods. The chassis is stable and the controllability is very good.
Foton Monpark engine must be familiar to everyone with Cummins. It has strong power and stable operation, long service life and fuel-saving! The noise and vibration of this car are also very small, and it is very smooth to drive. As we all know, Foton and Mercedes-Benz have a joint venture commercial vehicle project. The technology used is based on Mercedes-Benz, and the quality is also very reliable.
This car was launched relatively late, and the market holdings were not very high, but we have a lot of Kaimeng Pike. The VVT engine is technically mature and quite fuel-efficient.Repair and maintenance are not expensive. If you want to load a lot, it is recommended to use 4. Mine is 4. Usually, it is easy to run with two tons.
Mine is Monpaque E. At that time, I bought this car because I liked the fashionable appearance of the car, and I felt that the Monpaque was relatively large in the seven-seater car. After testing the 0L engine, it was also quite powerful, so I bought it directly. Now I have been driving it for more than half a year, and I feel that this car is particularly adaptable.
Compared with Monpaque E, I personally think Lingzhi is relatively better, because Lingzhi has a relatively large holding capacity and has a relative advantage in terms of car maintenance convenience.
Trade intelligence for marine cargo
author: 2024-12-23 21:33Global trade KPI dashboard templates
author: 2024-12-23 21:20Aggregated global trade insights dashboard
author: 2024-12-23 21:01Premium trade data intelligence subscriptions
author: 2024-12-23 20:52Cross-verifying suppliers by HS code
author: 2024-12-23 20:49Trade data-driven LCL/FCL strategies
author: 2024-12-23 21:32Construction materials HS code references
author: 2024-12-23 20:13Advanced materials HS code classification
author: 2024-12-23 20:07HS code-based multi-country consolidation
author: 2024-12-23 19:57855.28MB
Check127.19MB
Check425.18MB
Check323.56MB
Check771.98MB
Check714.18MB
Check417.89MB
Check788.66MB
Check213.14MB
Check141.28MB
Check878.95MB
Check878.37MB
Check331.59MB
Check773.65MB
Check239.64MB
Check278.23MB
Check387.94MB
Check441.66MB
Check148.86MB
Check693.98MB
Check655.51MB
Check377.95MB
Check211.84MB
Check419.34MB
Check986.38MB
Check336.82MB
Check854.74MB
Check757.24MB
Check524.55MB
Check683.45MB
Check992.85MB
Check754.88MB
Check568.67MB
Check828.72MB
Check978.93MB
Check144.73MB
CheckScan to install
Global trade data for PESTEL analysis to discover more
Netizen comments More
1216 Real-time trade document filing
2024-12-23 21:38 recommend
1466 UK HS code duty optimization
2024-12-23 21:05 recommend
1084 global trade intelligence
2024-12-23 20:35 recommend
1100 How to leverage global trade intelligence
2024-12-23 20:25 recommend
1110 Trade data for logistics companies
2024-12-23 20:16 recommend