Download and make an ASUS system recovery CD or USB flash drive.Insert the CD or USB flash drive into the computer and restart it. Enter the BIOS setting interface and set the CD or USB flash drive as the first boot item. Save the settings and restart the computer, and follow the prompts to install the system.
Step 1: Prepare the installation disk or USB drive. First, you need to prepare an installation CD or USB drive for the installation system. You can download the system installation file of the corresponding model through the official website, and then make it into a boot disk.
Click the "Start" button in the lower left corner. 2 Click "Settings" - "Update and Security" - "Restore" - "Reset this computer" - "Start" in order.
When the ASUS computer enters the boot interface, press the F9 key on the keyboard. After that, you will enter the following interface and select the troubleshooting option.Select to recharge this computer on the troubleshooting interface, and pay attention to be divided into important files. After that, the computer can enter the interface of reinstalling the system.
The steps to reinstall the system of this notebook are as follows: After the BIOS of the ASUS notebook is set, the notebook will have a pre-installed system. After entering the system, download the Xiaobai one-click reinstall system tool on Xiaobai's official website. After downloading and double-clicking to run the program, the software will automatically detect whether the ASUS notebook can reinstall the system.
1. It is recommended to try system repair: First, enter the safe mode and remove the recently installed driver/software. 1 Boot to WinRE (Windows Recovery Environment), which can be understood as recovery mode.
2. Select the control panel to uninstall the recently installed programs and updates in Add and Delete Programs (or Programs and Functions).
3. It is recommended that you try to restore the default settings of the BIOS: press the F2 key to enter the BIOS interface, press F9 to restore the initial value of BIOS, enter, and then click F10 to save and exit; if it is invalid, it may be that the system has not been installed or the ghost version of the system has been used. Use the driver software to update the driver or system patch.
4. Enter the BIOS, modify the hard disk mode, and try to restart after setting different modes to see if it can be started; disassemble the box, unplug the hard disk cable and reconnect it, and then try whether it can be started; pay attention to the boot process and touch the hard disk with your hand to see if it rotates normally;Press Ctrl+Alt+Del to restart the computer.
5. After booting into the BIOS, enter the Secure menu through the arrow keys and select the Secure Boot Menu option at the bottom. Change Secure Boot to Disabled. Press Esc to return to the upper menu, and press the arrow keys to move to the Boot page.
6. Please confirm whether any hardware has been installed/replaced recently, such as hard disk, memory stick, etc. If the card LOGO is installed after installing the memory stick, it is recommended to remove the memory stick first to test whether it is a hardware compatibility problem; if the card LOGO is installed/replaced after the hard disk, please confirm whether the operating system is correctly installed into the new hard disk.
Method 1: Use the recovery partition to restore the system. After shutting down, press the power button, hold down F9 at the same time, and enter the recovery interface. Select "Language" and "Keyboard Input Method" in the recovery interface, and click "Next". Select "Delete Data" and click "Next".
Enter BIOS, set Security-Secure Boot Control to Disabled, Boot-CSM Support to Enabled, (models without CSM options only support UEFI startup ) Press F10 to save, insert the system to install the USB flash drive, restart and press ESC to select the startup item.
The following is heavySteps to install the ASUS notebook system: Step 1: Prepare the installation disk or USB drive. First, you need to prepare an installation CD or USB drive for the installation system. You can download the system installation file of the corresponding model through the official website, and then make it into a boot disk.
1. You can press the power-on button for a long time until the machine is out of power, then turn it on and then turn off the power. Repeat 3-5 times until you enter the recovery mode as shown in the figure below. 2 From the selection option screen, click or click to solve the problem
2. The first solution: reinstall the system. If there is a problem with the hardware, you can do it as follows: remove the noteThe battery on the back of this book can only be connected to the computer with a power adapter and try to turn it on. If the power is turned on normally, it is caused by poor battery contact or battery failure.
3. Turn on the computer to start, wait for the boot logo to appear, and then repeatedly press the "Del" key to enter the BIOS settings. Then click "Settings" in the upper left corner of the pop-up interface. Then double-click the "Advanced" option on the right in the pop-up interface.
4. It is recommended that you try to restore the default settings of the BIOS: press the F2 key to enter the BIOS interface, press F9 to restore the initial value of the BIOS, enter, and then click F10 to save and exit; if it is invalid, it may be that the system has not been installed or the ghost version of the system has been used. Use the driver software to update the driver or system patch.
5. The reason why the ASUS laptop cannot enter the system after power-on may be caused by the recent improper shutdown method. The operation method is as follows: press the f8 key continuously after clicking the power-on. Enter the advanced options interface. Use the arrow keys to select and click the last correct configuration option.
6. If the computer system fails, you need to enter the advanced startup interface to set up and solve it. The steps are as follows: First, on your laptop, find the f8 key on the right, and press the f8 key for a long time until the interface appears while turning on the power-on.
How to forecast seasonal import demands-APP, download it now, new users will receive a novice gift pack.
Download and make an ASUS system recovery CD or USB flash drive.Insert the CD or USB flash drive into the computer and restart it. Enter the BIOS setting interface and set the CD or USB flash drive as the first boot item. Save the settings and restart the computer, and follow the prompts to install the system.
Step 1: Prepare the installation disk or USB drive. First, you need to prepare an installation CD or USB drive for the installation system. You can download the system installation file of the corresponding model through the official website, and then make it into a boot disk.
Click the "Start" button in the lower left corner. 2 Click "Settings" - "Update and Security" - "Restore" - "Reset this computer" - "Start" in order.
When the ASUS computer enters the boot interface, press the F9 key on the keyboard. After that, you will enter the following interface and select the troubleshooting option.Select to recharge this computer on the troubleshooting interface, and pay attention to be divided into important files. After that, the computer can enter the interface of reinstalling the system.
The steps to reinstall the system of this notebook are as follows: After the BIOS of the ASUS notebook is set, the notebook will have a pre-installed system. After entering the system, download the Xiaobai one-click reinstall system tool on Xiaobai's official website. After downloading and double-clicking to run the program, the software will automatically detect whether the ASUS notebook can reinstall the system.
1. It is recommended to try system repair: First, enter the safe mode and remove the recently installed driver/software. 1 Boot to WinRE (Windows Recovery Environment), which can be understood as recovery mode.
2. Select the control panel to uninstall the recently installed programs and updates in Add and Delete Programs (or Programs and Functions).
3. It is recommended that you try to restore the default settings of the BIOS: press the F2 key to enter the BIOS interface, press F9 to restore the initial value of BIOS, enter, and then click F10 to save and exit; if it is invalid, it may be that the system has not been installed or the ghost version of the system has been used. Use the driver software to update the driver or system patch.
4. Enter the BIOS, modify the hard disk mode, and try to restart after setting different modes to see if it can be started; disassemble the box, unplug the hard disk cable and reconnect it, and then try whether it can be started; pay attention to the boot process and touch the hard disk with your hand to see if it rotates normally;Press Ctrl+Alt+Del to restart the computer.
5. After booting into the BIOS, enter the Secure menu through the arrow keys and select the Secure Boot Menu option at the bottom. Change Secure Boot to Disabled. Press Esc to return to the upper menu, and press the arrow keys to move to the Boot page.
6. Please confirm whether any hardware has been installed/replaced recently, such as hard disk, memory stick, etc. If the card LOGO is installed after installing the memory stick, it is recommended to remove the memory stick first to test whether it is a hardware compatibility problem; if the card LOGO is installed/replaced after the hard disk, please confirm whether the operating system is correctly installed into the new hard disk.
Method 1: Use the recovery partition to restore the system. After shutting down, press the power button, hold down F9 at the same time, and enter the recovery interface. Select "Language" and "Keyboard Input Method" in the recovery interface, and click "Next". Select "Delete Data" and click "Next".
Enter BIOS, set Security-Secure Boot Control to Disabled, Boot-CSM Support to Enabled, (models without CSM options only support UEFI startup ) Press F10 to save, insert the system to install the USB flash drive, restart and press ESC to select the startup item.
The following is heavySteps to install the ASUS notebook system: Step 1: Prepare the installation disk or USB drive. First, you need to prepare an installation CD or USB drive for the installation system. You can download the system installation file of the corresponding model through the official website, and then make it into a boot disk.
1. You can press the power-on button for a long time until the machine is out of power, then turn it on and then turn off the power. Repeat 3-5 times until you enter the recovery mode as shown in the figure below. 2 From the selection option screen, click or click to solve the problem
2. The first solution: reinstall the system. If there is a problem with the hardware, you can do it as follows: remove the noteThe battery on the back of this book can only be connected to the computer with a power adapter and try to turn it on. If the power is turned on normally, it is caused by poor battery contact or battery failure.
3. Turn on the computer to start, wait for the boot logo to appear, and then repeatedly press the "Del" key to enter the BIOS settings. Then click "Settings" in the upper left corner of the pop-up interface. Then double-click the "Advanced" option on the right in the pop-up interface.
4. It is recommended that you try to restore the default settings of the BIOS: press the F2 key to enter the BIOS interface, press F9 to restore the initial value of the BIOS, enter, and then click F10 to save and exit; if it is invalid, it may be that the system has not been installed or the ghost version of the system has been used. Use the driver software to update the driver or system patch.
5. The reason why the ASUS laptop cannot enter the system after power-on may be caused by the recent improper shutdown method. The operation method is as follows: press the f8 key continuously after clicking the power-on. Enter the advanced options interface. Use the arrow keys to select and click the last correct configuration option.
6. If the computer system fails, you need to enter the advanced startup interface to set up and solve it. The steps are as follows: First, on your laptop, find the f8 key on the right, and press the f8 key for a long time until the interface appears while turning on the power-on.
Predictive analytics for supplier risks
author: 2024-12-23 20:46Solar panel imports HS code references
author: 2024-12-23 20:38Germany export data by HS code
author: 2024-12-23 20:23Germany international trade insights
author: 2024-12-23 20:22HS code mapping in government tenders
author: 2024-12-23 21:24International trade law reference data
author: 2024-12-23 21:01Global trade data integration services
author: 2024-12-23 20:21Comprehensive supplier audit data
author: 2024-12-23 19:58HS code-driven supply chain benchmarking
author: 2024-12-23 19:17915.93MB
Check844.34MB
Check537.73MB
Check176.64MB
Check629.89MB
Check832.76MB
Check197.84MB
Check437.85MB
Check346.15MB
Check447.19MB
Check871.29MB
Check261.93MB
Check474.83MB
Check992.86MB
Check386.43MB
Check141.92MB
Check275.72MB
Check924.42MB
Check314.68MB
Check245.74MB
Check144.27MB
Check815.78MB
Check366.66MB
Check493.77MB
Check757.43MB
Check113.96MB
Check791.36MB
Check718.99MB
Check555.32MB
Check719.95MB
Check631.96MB
Check438.44MB
Check766.94MB
Check922.25MB
Check283.76MB
Check465.61MB
CheckScan to install
How to forecast seasonal import demands to discover more
Netizen comments More
1169 Industrial cleaning supplies HS code checks
2024-12-23 21:23 recommend
2479 HS code-driven environmental compliance
2024-12-23 20:00 recommend
1393 Country-specific HS code duty reclaims
2024-12-23 19:33 recommend
1723 Global trade compliance scorecards
2024-12-23 19:20 recommend
1784 HS code compliance for customs
2024-12-23 19:14 recommend