It may be a false failure caused by inadvertent operation when parking.
At this time, you should pull over immediately. Otherwise, the vehicle may run out of control, leading to car accidents and deaths. You need to go to the car repair center to check the repair and read the fault code to eliminate it. The anti-lock braking system is an active safety system in automobiles, also known as the "ABS" braking system.
The meaning of checking the anti-lock braking system in the car is as follows: ABS "ABS" (Anti-locked Braking System) is translated into Chinese as "anti-locking braking system";It is a kind of automobile safety control system with the advantages of anti-skid, anti-lock and so on.
It not only has the braking function of the ordinary brake system, but also prevents the wheel from locking, so that the car can still turn in the braking state, ensure the stability of the braking direction of the car, and prevent side slippage and deviation. It is the most advanced and best braking device on the car at present.
1. Possible causes include wheel speed sensor failure, line failure, etc. Check the brake system: The failure of the brake system may also cause the failure of the Civic anti-lock braking system. Check whether there are any problems with the brake pads, brake discs, brake cylinders and other parts.
2. The ABS line is broken due to external force or the sensor plug is plugged in and plugged in. Wires and plug connections need to be repaired. The fault light turns on due to the damage of the ABS control unit. The control unit needs to be replaced. The power supply voltage is unstable, and the ABS cannot work normally, causing the fault light to light up. It is necessary to check the power supply system of the vehicle.
3. When AWhen the BS light is on, the safety system of some vehicles will automatically lock the ignition system, so that the car cannot drive: oil problem. When I used to repair the car, I found that there was water and mud in the fuel tank after disassembly. With such oil, it was impossible for the car not to break down.
4. Honda Civic is not easy to ignite. The reason for checking the brake system is: the abnormal mixing ratio of the car. The solution is: If the mixing ratio of the car is abnormal, you need to go to the 4S store or repair shop of the car in time to check the mixing ratio, which can solve the problem that the car is not easy to catch fire.
1. The inspection appears on the carThe meaning of anti-locking braking system is as follows: ABS "ABS" (Anti-locked Braking System) is translated into Chinese as "anti-locking braking system"; it is a kind of automobile safety control system with advantages such as anti-skid and anti-locking.
2. Checking the anti-lock braking system means that there is a problem with the abs anti-locking braking system of the car, and the instrument shows a reminder. At this time, you should pull over immediately. Otherwise, the vehicle may run out of control, leading to car accidents and deaths. You need to go to the car repair center to check the repair and read the fault code to eliminate it.
3. The constant of the abs function light on the dashboard of the car indicates that the anti-lock braking system of the car is faulty, which needs to be tested and repaired at the car maintenance center. After repair, the abs function light of the car will be automatically eliminated.
1. Precautions for ABS maintenance (1) ABS system is inseparable from ordinary braking system, Once there is a problem with the ordinary braking system, the ABS system cannot work normally. Therefore, it is necessary to regard the two as a whole for maintenance, and not only focus on sensors, electronic control units and hydraulic regulators.
2. Preliminary inspection is the first inspection method adopted when the ABS system has an obvious failure and does not work properly (1) Check whether the parking brake (handbrake) is fully released. ( 2) Check whether the brake fluid level is within the specified range.
3. Before repairing and disassembling the ABS system, the power supply of the ECU should be cut off first and the brake system should be depressurized to avoid high-pressure brake fluid from injuring.
HS code integration in trade blockchains-APP, download it now, new users will receive a novice gift pack.
It may be a false failure caused by inadvertent operation when parking.
At this time, you should pull over immediately. Otherwise, the vehicle may run out of control, leading to car accidents and deaths. You need to go to the car repair center to check the repair and read the fault code to eliminate it. The anti-lock braking system is an active safety system in automobiles, also known as the "ABS" braking system.
The meaning of checking the anti-lock braking system in the car is as follows: ABS "ABS" (Anti-locked Braking System) is translated into Chinese as "anti-locking braking system";It is a kind of automobile safety control system with the advantages of anti-skid, anti-lock and so on.
It not only has the braking function of the ordinary brake system, but also prevents the wheel from locking, so that the car can still turn in the braking state, ensure the stability of the braking direction of the car, and prevent side slippage and deviation. It is the most advanced and best braking device on the car at present.
1. Possible causes include wheel speed sensor failure, line failure, etc. Check the brake system: The failure of the brake system may also cause the failure of the Civic anti-lock braking system. Check whether there are any problems with the brake pads, brake discs, brake cylinders and other parts.
2. The ABS line is broken due to external force or the sensor plug is plugged in and plugged in. Wires and plug connections need to be repaired. The fault light turns on due to the damage of the ABS control unit. The control unit needs to be replaced. The power supply voltage is unstable, and the ABS cannot work normally, causing the fault light to light up. It is necessary to check the power supply system of the vehicle.
3. When AWhen the BS light is on, the safety system of some vehicles will automatically lock the ignition system, so that the car cannot drive: oil problem. When I used to repair the car, I found that there was water and mud in the fuel tank after disassembly. With such oil, it was impossible for the car not to break down.
4. Honda Civic is not easy to ignite. The reason for checking the brake system is: the abnormal mixing ratio of the car. The solution is: If the mixing ratio of the car is abnormal, you need to go to the 4S store or repair shop of the car in time to check the mixing ratio, which can solve the problem that the car is not easy to catch fire.
1. The inspection appears on the carThe meaning of anti-locking braking system is as follows: ABS "ABS" (Anti-locked Braking System) is translated into Chinese as "anti-locking braking system"; it is a kind of automobile safety control system with advantages such as anti-skid and anti-locking.
2. Checking the anti-lock braking system means that there is a problem with the abs anti-locking braking system of the car, and the instrument shows a reminder. At this time, you should pull over immediately. Otherwise, the vehicle may run out of control, leading to car accidents and deaths. You need to go to the car repair center to check the repair and read the fault code to eliminate it.
3. The constant of the abs function light on the dashboard of the car indicates that the anti-lock braking system of the car is faulty, which needs to be tested and repaired at the car maintenance center. After repair, the abs function light of the car will be automatically eliminated.
1. Precautions for ABS maintenance (1) ABS system is inseparable from ordinary braking system, Once there is a problem with the ordinary braking system, the ABS system cannot work normally. Therefore, it is necessary to regard the two as a whole for maintenance, and not only focus on sensors, electronic control units and hydraulic regulators.
2. Preliminary inspection is the first inspection method adopted when the ABS system has an obvious failure and does not work properly (1) Check whether the parking brake (handbrake) is fully released. ( 2) Check whether the brake fluid level is within the specified range.
3. Before repairing and disassembling the ABS system, the power supply of the ECU should be cut off first and the brake system should be depressurized to avoid high-pressure brake fluid from injuring.
China trade data analysis tools
author: 2024-12-23 21:47Predictive container utilization analytics
author: 2024-12-23 21:27UK trade data management software
author: 2024-12-23 21:17Global trade tender evaluation tools
author: 2024-12-23 19:15Trade data for chemical imports
author: 2024-12-23 21:32Processed meat HS code verification
author: 2024-12-23 21:09Predictive container utilization analytics
author: 2024-12-23 20:51Industry-specific import regulation data
author: 2024-12-23 19:28Steel pipes (HS code ) trade insights
author: 2024-12-23 19:12131.33MB
Check831.15MB
Check122.97MB
Check223.77MB
Check946.95MB
Check718.38MB
Check426.99MB
Check546.12MB
Check956.25MB
Check655.43MB
Check652.26MB
Check697.83MB
Check735.42MB
Check167.31MB
Check283.63MB
Check344.68MB
Check852.65MB
Check485.79MB
Check413.68MB
Check361.84MB
Check229.67MB
Check365.44MB
Check895.79MB
Check621.91MB
Check566.95MB
Check244.91MB
Check556.15MB
Check373.25MB
Check919.84MB
Check265.86MB
Check141.11MB
Check511.78MB
Check827.67MB
Check942.19MB
Check589.71MB
Check985.49MB
CheckScan to install
HS code integration in trade blockchains to discover more
Netizen comments More
773 How to integrate trade data into workflows
2024-12-23 21:47 recommend
2757 How to implement JIT with global data
2024-12-23 19:58 recommend
2133 How to track compliance breaches
2024-12-23 19:42 recommend
2570 How to evaluate free trade agreements
2024-12-23 19:32 recommend
1636 How to interpret trade statistics
2024-12-23 19:29 recommend