1. The advantage of Guowu Fukang 490 engine is that it is relatively fuel-efficient and suitable for long-distance driving. The disadvantage is that it is heavy load is weak and weak uphill. According to the relevant public information of the inquiry, the Cummins engine is suitable for long-distance running or pulling the standard load. In terms of fuel consumption, the fuel consumption of Cummins and Hangfa is the same, and the fuel consumption is relatively higher for Weichai.
2. Light weight The 490 engine is light in weight. Its weight is only half that of an ordinary engine, but its power is much greater than that of ordinary engines, so it can provide a better driving experience. Because of its light weight, the controllability of the car will be better and more economical.
3. Rate: Depending on the number of cylinders, the power output of 485 and 490 is also different.In general, the output of the 490 engine rate is higher than that of the 485 engine. The specific function depends on the launch and configuration. Application domain: 485490 is suitable for different application fields.
4. The engine of Oman 490 Fukang is very good. Introduction of Fukang 490 horsepower in 2017: The 490 horsepower Guoliu Fukang machine is matched with ZF's 12-speed AMT. In terms of power, the car is equipped with the Foton Cummins X12 engine, the model is X12NS6B490, which is an in-line six-cylinder engine.
5. Good quality. The parts of Fukang 490 are made of stainless steel, which is of good quality and has a long service life, while the parts of 460 are made of iron, which are of poor quality and have a short service life. It is cost-effective. Compared with 460, Fukang 490 is economical in price, cost-effective, very good quality and effect, which is deeply loved by the masses. Fukang 490 is good.
6. In terms of power output, the maximum power of the two engines is also different. The maximum power of the 498 engine is 68 horsepower, while the maximum power of the 490 engine is 83 horsepower. This shows that under the same conditions, the power output of the 490 engine is stronger, which can drive heavier load-bearing objects at the same time.
Ankang is good, buy Jianghuai and choose Anhui Cummins Power. Theoretically, Anhui Cummins and Foton Cummins are the same, both in accordance with Cummins' research and development and production standards. However, Anhui Cummins, as a joint venture between Jianghuai and Cummins, can achieve a deep match with Jianghuai 1 card, so Anhui Cummins is the first choice to buy Jianghuai.
Compared with the Cummins engine, although the Fukang engine is different in technology and performance, it has a certain guarantee in quality and reliability, and also has a higher cost performance.
Oman Fukang is better than Cummins. Cummins whistles less, low fuel consumption, durable, and not prone to problems.However, the heavy load of Oman Fukang is weak, the uphill is weak, the maintenance cost is high, and the engine will not be ignited after a long time. So Oman Focon is better than Cummins.
Hello, Fukuda Cummins. High power: The Foton Cummins 470 engine has a maximum power of 241kW (333hp), which is relatively light and low-cost.
Technical features: Foton Aucon engine adopts the overall power mode of innovative engine + gearbox, and adheres to strict BDVP process and technical standards for reasonable and efficient production; while Cummins engine adopts advanced electronic control technology and high-efficiency and energy-saving design, with low noise , low emission, low fuel consumption and other characteristics.
Fukang 460, Weichai 460. Fukang 460 is a 460 horsepower produced by Cummins. The engine has advanced technology, strong power, energy-saving and environmental protection, and stable operation. The Weichai 460 engine has high oil compatibility and also has excellent performance than other models under harsh working conditions such as plateaus.
I often run in Yunguichuan and Tibet. It is recommended to choose a speed ratio of at least 7 or more.
Futian Cummins has good 460 horsepower. According to the official style of Foton Automobile, the Fukang 460 is a 460 horsepower produced by Cummins. The engine technology is advanced, powerful, energy-saving and environmental protection. And the engine of Fukang Engine 460 is very powerful, and the operation is very stable. The quality and after-sales service are good.
1. Fukang. According to the official website of Cummins, the maximum power of the 5-liter engine reaches 117KW, while the maximum power of the Ocon 5-liter engine is only 105KW. In terms of horsepower, the Fukang 5-liter engine is stronger than the Ocon 5-liter engine. So the Fukang engine is good.
2. Fukang engine is good. The Fukang engine adopts aluminum alloy cylinder head and cylinder block, which has high strength and low weight, which is conducive to improving the power output and fuel economy of the engine. The Fukang engine also adopts multi-point electric injection technology, which can control fuel injection more accurately and improve combustion efficiency and power performance.
3. OK. Brand: Fukang Baby is a brand specializing in the production of infant and baby products. Its walker products have a good reputation in the market.Material: Fukang baby walker adopts environmentally friendly materials, non-toxic and tasteless, meets national security standards, and adopts ergonomic design to meet the needs of baby's growth and development.
4. Fukang. The Fukang engine has more power and horsepower than Ankang. The Fukang engine has better performance and is more expensive than Ankang.
5. Personally, I think Dewei D25 will be better. Dewei D25 is produced by Yunnai Power. After long-term market verification, the product performance is relatively reliable. Fukang F5 is a "newborn" developed for the new regulations. Fukang has always been 8L and 8L before, so the Dewei D25 engine is more mature and more cost-effective.
1. This engine also has the advantages of high reliability and low maintenance cost, which has been recognized and praised by the majority of users. The technical parameters and performance indicators of Foton Cummins 360 horsepower Guoliu have reached the leading level in China, which is a very excellent engine product.
2. Fukang engine, the explosive power is good, the standard load is fuel-saving, there are many minor problems, and the winning rate is higher. If you don't win the prize, it is very good. 360 horsepower rear eight, equipped with overspeed gearbox, with 111 speed ratio, standard load running plain, fuel consumption per 100 kilometers, also has to be 27-30. It's hard to say if there are too many slopes.
3. The previous Fukang engine has more problems, the technology is immature, and the durability is poor. Now the technology is much more mature, there are fewer problems, the maintenance is more expensive, the maintenance is troublesome, and the maintenance is good, which is also very good.
How to track non-compliance incidents-APP, download it now, new users will receive a novice gift pack.
1. The advantage of Guowu Fukang 490 engine is that it is relatively fuel-efficient and suitable for long-distance driving. The disadvantage is that it is heavy load is weak and weak uphill. According to the relevant public information of the inquiry, the Cummins engine is suitable for long-distance running or pulling the standard load. In terms of fuel consumption, the fuel consumption of Cummins and Hangfa is the same, and the fuel consumption is relatively higher for Weichai.
2. Light weight The 490 engine is light in weight. Its weight is only half that of an ordinary engine, but its power is much greater than that of ordinary engines, so it can provide a better driving experience. Because of its light weight, the controllability of the car will be better and more economical.
3. Rate: Depending on the number of cylinders, the power output of 485 and 490 is also different.In general, the output of the 490 engine rate is higher than that of the 485 engine. The specific function depends on the launch and configuration. Application domain: 485490 is suitable for different application fields.
4. The engine of Oman 490 Fukang is very good. Introduction of Fukang 490 horsepower in 2017: The 490 horsepower Guoliu Fukang machine is matched with ZF's 12-speed AMT. In terms of power, the car is equipped with the Foton Cummins X12 engine, the model is X12NS6B490, which is an in-line six-cylinder engine.
5. Good quality. The parts of Fukang 490 are made of stainless steel, which is of good quality and has a long service life, while the parts of 460 are made of iron, which are of poor quality and have a short service life. It is cost-effective. Compared with 460, Fukang 490 is economical in price, cost-effective, very good quality and effect, which is deeply loved by the masses. Fukang 490 is good.
6. In terms of power output, the maximum power of the two engines is also different. The maximum power of the 498 engine is 68 horsepower, while the maximum power of the 490 engine is 83 horsepower. This shows that under the same conditions, the power output of the 490 engine is stronger, which can drive heavier load-bearing objects at the same time.
Ankang is good, buy Jianghuai and choose Anhui Cummins Power. Theoretically, Anhui Cummins and Foton Cummins are the same, both in accordance with Cummins' research and development and production standards. However, Anhui Cummins, as a joint venture between Jianghuai and Cummins, can achieve a deep match with Jianghuai 1 card, so Anhui Cummins is the first choice to buy Jianghuai.
Compared with the Cummins engine, although the Fukang engine is different in technology and performance, it has a certain guarantee in quality and reliability, and also has a higher cost performance.
Oman Fukang is better than Cummins. Cummins whistles less, low fuel consumption, durable, and not prone to problems.However, the heavy load of Oman Fukang is weak, the uphill is weak, the maintenance cost is high, and the engine will not be ignited after a long time. So Oman Focon is better than Cummins.
Hello, Fukuda Cummins. High power: The Foton Cummins 470 engine has a maximum power of 241kW (333hp), which is relatively light and low-cost.
Technical features: Foton Aucon engine adopts the overall power mode of innovative engine + gearbox, and adheres to strict BDVP process and technical standards for reasonable and efficient production; while Cummins engine adopts advanced electronic control technology and high-efficiency and energy-saving design, with low noise , low emission, low fuel consumption and other characteristics.
Fukang 460, Weichai 460. Fukang 460 is a 460 horsepower produced by Cummins. The engine has advanced technology, strong power, energy-saving and environmental protection, and stable operation. The Weichai 460 engine has high oil compatibility and also has excellent performance than other models under harsh working conditions such as plateaus.
I often run in Yunguichuan and Tibet. It is recommended to choose a speed ratio of at least 7 or more.
Futian Cummins has good 460 horsepower. According to the official style of Foton Automobile, the Fukang 460 is a 460 horsepower produced by Cummins. The engine technology is advanced, powerful, energy-saving and environmental protection. And the engine of Fukang Engine 460 is very powerful, and the operation is very stable. The quality and after-sales service are good.
1. Fukang. According to the official website of Cummins, the maximum power of the 5-liter engine reaches 117KW, while the maximum power of the Ocon 5-liter engine is only 105KW. In terms of horsepower, the Fukang 5-liter engine is stronger than the Ocon 5-liter engine. So the Fukang engine is good.
2. Fukang engine is good. The Fukang engine adopts aluminum alloy cylinder head and cylinder block, which has high strength and low weight, which is conducive to improving the power output and fuel economy of the engine. The Fukang engine also adopts multi-point electric injection technology, which can control fuel injection more accurately and improve combustion efficiency and power performance.
3. OK. Brand: Fukang Baby is a brand specializing in the production of infant and baby products. Its walker products have a good reputation in the market.Material: Fukang baby walker adopts environmentally friendly materials, non-toxic and tasteless, meets national security standards, and adopts ergonomic design to meet the needs of baby's growth and development.
4. Fukang. The Fukang engine has more power and horsepower than Ankang. The Fukang engine has better performance and is more expensive than Ankang.
5. Personally, I think Dewei D25 will be better. Dewei D25 is produced by Yunnai Power. After long-term market verification, the product performance is relatively reliable. Fukang F5 is a "newborn" developed for the new regulations. Fukang has always been 8L and 8L before, so the Dewei D25 engine is more mature and more cost-effective.
1. This engine also has the advantages of high reliability and low maintenance cost, which has been recognized and praised by the majority of users. The technical parameters and performance indicators of Foton Cummins 360 horsepower Guoliu have reached the leading level in China, which is a very excellent engine product.
2. Fukang engine, the explosive power is good, the standard load is fuel-saving, there are many minor problems, and the winning rate is higher. If you don't win the prize, it is very good. 360 horsepower rear eight, equipped with overspeed gearbox, with 111 speed ratio, standard load running plain, fuel consumption per 100 kilometers, also has to be 27-30. It's hard to say if there are too many slopes.
3. The previous Fukang engine has more problems, the technology is immature, and the durability is poor. Now the technology is much more mature, there are fewer problems, the maintenance is more expensive, the maintenance is troublesome, and the maintenance is good, which is also very good.
HS code accuracy for automotive exports
author: 2024-12-24 00:03Inland freight HS code applicability
author: 2024-12-23 23:43Top trade data keywords for SEO
author: 2024-12-23 23:10How to reduce shipping delays with data
author: 2024-12-23 22:27Canada HS code classification assistance
author: 2024-12-23 21:56Region-specific HS code advisory
author: 2024-12-24 00:15Steel industry HS code references
author: 2024-12-23 23:50Real-time trade document filing
author: 2024-12-23 23:44Comparing trade data providers
author: 2024-12-23 23:29Trade data for GDP correlation analysis
author: 2024-12-23 22:58597.69MB
Check259.57MB
Check518.27MB
Check453.18MB
Check513.77MB
Check667.99MB
Check393.93MB
Check743.42MB
Check443.62MB
Check265.65MB
Check345.69MB
Check458.42MB
Check537.96MB
Check754.58MB
Check177.47MB
Check772.13MB
Check221.65MB
Check978.65MB
Check845.41MB
Check479.89MB
Check253.29MB
Check579.64MB
Check352.95MB
Check229.33MB
Check144.75MB
Check492.32MB
Check676.69MB
Check814.79MB
Check834.76MB
Check562.61MB
Check426.84MB
Check789.87MB
Check791.62MB
Check595.57MB
Check395.34MB
Check211.28MB
CheckScan to install
How to track non-compliance incidents to discover more
Netizen comments More
816 Processed seafood HS code references
2024-12-24 00:13 recommend
497 How to use data for HS code classification
2024-12-23 23:49 recommend
1540 Machine tools HS code classification
2024-12-23 23:08 recommend
2647 Country-of-origin rules by HS code
2024-12-23 22:58 recommend
1396 Dynamic trade data cleansing
2024-12-23 22:05 recommend