Advanced trade route cost analysis

List of the catalog of this article:

• 1,Advanced trade route cost analysis The engine of the Fulu Golden Horse tricycle shakes, and the cold car turns off
• 2, How about the Fulu Jinjunma engine
• 3, Fulu fuel tricycle car waste oil
• 4, What oil is used for the Fulu single-cylinder 200 engine
• 5, What kind of electric injection system is Fulu Jinjunma?
• 6, How to replace the Fulu Jinjunma engine

The engine of the Fulu Jinjun horse tricycle is shaking, and the engine of the cold car is turned off

The engine is seriously carbonized. The most common cause of idling jitter is excessive carbonisation of the throttle valve or fuel nozzle.

The combustible mixture is too thick. The remaining part that has not been burned will accumulate and be carbonized on the spark plug electrode, causing the spark plug to jump abnormally until the carbon is damaged. The reasons why the combustible mixture is too thick are generally that the oil plane of the carburetor is too high, the main air volume hole of the carburetor is blocked, and the air filter element is seriously blocked.

Whether the cold car starts without sufficient preheating, it may also lead to shutdown due to low engine temperature, insufficient combustion and unstable operation, and abnormal operation of the oil viscosity and clutch.

How about the Fulu Jinjunma engine

How about Jinjunma.The Golden Horse adopts a three-cylinder engine with a stronger power output, which is suitable for use in mountainous or heavy-duty situations. Jinjun is equipped with anti-lock braking system, electronic braking power distribution system and other safety configurations to improve the safety of driving.

According to the query of China Electric Vehicle Network, the Fulu Jinjunma motorcycle series is a high-end motorcycle under Fulu Company. This car adopts a 600cc electric injection twin-cylinder engine with a maximum power of 2kw. Through the upgrade of the engine, Fulu Jinjunma can be used in poor road conditions. Driving smoothly, and the fuel consumption is also lower.

When there is too much carbon inside the engine, the gasoline sprayed by the cold start fuel injector will be absorbed by a large amount of carbon, resulting in the cold start mixed gas being too thin, which will cause the engine to shake and the cold car to turn off.The Fulu Jinjun horse tricycle is a fully enclosed motorcycle type. The body structure is a semi-load-bearing CNC mold, and it is a 600cc electric injection twin-cylinder engine.

Is Fulu fuel three-wheeled car waste oil?

L. Fulu Red Rabbit Horse is a miniature tricycle car. The car adopts a Chery 600ml in-line twin-cylinder engine, with iHEC (smart effect) combustion technology, electronically controlled fuel multi-point injection, lower fuel consumption, and the fuel consumption is as low as 5L per 100 kilometers.

Fulu Chituma 200 is fuel-efficient, and the fuel consumption of Fulu Chituma 200cc is about 5 liters of oil. Fulu Red Rabbit adopts a Chery in-line twin-cylinder engine, with iHEC (smart effect) combustion technology, electronically controlled fuel multi-point injection, lower fuel consumption, and the fuel consumption under working conditions is as low as 5L per 100 kilometers.

fuel fee. Because the fuel tricycle's own weight is relatively large, if it needs to carry people or goods, it will lead to a greater weight, which will cause a great burden on the fuel tricycle and require more oil to operate normally, so it is very fuel-consuming.

100 kilometers 5 liters Fulu Jinjunma A6 three-wheeled old scooter speed and fuel consumption 100 kilometers fuel consumption in 100 kilometers 5 liters.

Fulu Automobile Industry has been focusing on three-wheeled caravans for 15 years, and all products are produced according to the four major processes of automobile stamping, welding, painting and general assembly. His products are from the national catalog and can be registered, as if they are the only one in the country. Many users in the market choose the rich road. His car, like a car, has a balancer and won't overturn. You can try it and buy it again.

Fulu fully enclosed 150 three-wheeled motorcycle consumes 4 liters of fuel.The size of fuel consumption is not only related to the performance of the vehicle, but also to the characteristics of the road and driving technology. The fuel consumption is different in different situations. Calculation method: Fill the fuel tank at once and then use it up before looking at the odometer record number.

What oil is used for the Fulu single-cylinder 200 engine

1. Jiashi multi-pole protection fully synthetic oil 5W30. According to the official website of Fulu Chituma, Fulu single-cylinder 200 Chituma uses Jiashi multi-pole fully synthetic engine oil 5W30, which has good lubrication effect, low noise, good fluidity, and good cleaning effect.

2. Use additive-graded oil divided into CC, CD and CF. According to the viscosity, it is also divided into single-level viscosity, such as No. 30, 40 and 50 engine oil., multi-level viscosity is divided into 10W-30, 15W-40 and 20W-50, and the grade of oil used is selected according to the diesel engine load and working environment.

3. Hello, it is recommended to use the 5W40 Shell or the 10W40 Carstor [If there is a problem with the car, ask the car master. 4S store professional technician, 10 minutes to solve.

What kind of electric injection system is Fulu Jinjunma?

1. There is too much carbon in the fuel injector. When there is too much carbon inside the engine, the gasoline sprayed by the cold start fuel injection head will be absorbed in a large amount of carbon, resulting in too thinness of the cold start mixture, which will cause the engine to shake and the cold car to shut down.

2. The engine of Fulu Jinjunma is good. Fulu JinjunmacaiIt uses a two-cylinder four-stroke water-cooled electrically controlled fuel injection engine, with a maximum speed of 100 km/h, rear drive, independent suspension at the rear, and a three-wheel hydraulic disc brake to ensure a safe braking effect.

3. Fulu three-wheeled golden horse parameter configuration of the whole vehicle parameters: size 3260*1542*1558. Wheelbase: 2250mm. Rear wheelbase: 1300mm. Steering wheel type: biased disc. Maximum speed: 100km/h.

4. It seems that there are gold, silver, white and red. The size of the whole car is 3256*1500*1546mm, with a low height and relatively wide, and the stability is better than that of common tricycles.

How to replace the Fulu Jinjun horse engine

1. Mark the crankshaft and camshaft, fold the belt into the side of the tightening wheel, and support the tightening wheel.

2. Installation steps: 1. During the installation process, close the key. 2. There should be a margin when the wiring harness is fixed, and the bundling position should be reasonable. 3. Oil pipes and bolts should be reliable, frictionless and interference-free.

3. It is recommended to replace the oil filter together with the oil. There is no fixed cycle for the oil replacement cycle, which is related to many factors such as the car environment, habits, types of oil, etc. Without considering the influence of factors such as environment and habits, if you want to change the cycle for a long time, you can use fully synthetic oil.

4. The engine of Fulu Jinjunma is good. Fulu Jinjunma adopts a two-cylinder four-stroke water-cooled electrically controlled fuel injection engine, with a maximum speed of 100 km/h, rear drive, independent suspension at the rear, and three-wheel hydraulic disc brake to ensure safe braking effect.

5. According to the inquiry of Pacific Automobile, the steps for replacing the antifreeze of the Fulu Golden Horse Twin Cylinder 600 are as follows: stop for more than half an hour to cool the engine to avoid being burned by the antifreeze. Unscrew the water release screw at the bottom of the water tank. When the antifreeze no longer flows out of the water outlet, the old antifreeze is basically discharged.

6. There is too much carbon accumulation in the fuel injection nozzle. When there is too much carbon inside the engine, the gasoline sprayed by the cold start fuel injection head will be absorbed in a large amount of carbon, resulting in too thinness of the cold start mixture, which will cause the engine to shake and the cold car to shut down.