India global market access guide

List of the catalog of this article:

• 1, How to set up one-click lifting and lowering of car windows?
• 2、Car Window (Car Window) Detailed Information Collection
• 3,India global market access guide What's wrong with the lifting and lowering of the car window glass
• 4, Car window abnormal sound
• 5, How to open the window of a car? This is a science!
• 6, What is the use of the triangular window of a car?

How to set up one-click lifting and lowering of car windows?

1. One-click window setting: First, click the one-click start button of the vehicle to charge the vehicle, and then continuously pull the one-click window lift button at the left door armrest. When pulling the window lifting button, click the button on the left multi-function steering wheel. Then click the SET button on the right multi-function steering wheel to set the one-click window lift function.

2. Usually, one-click window lift can be achieved by pressing the unlock button on the car key. The specific operation method is that if you don't let go after pressing the unlock button, the window will automatically rise until it rises to the set height or is completely open. If you need to lower the window, just insert the key into the door lock hole and then rotate it down.

3. The one-click lifting and lowering method of the window with the remote control key is as follows: First, you need to find the opening and closing buttons of the window on the door of the driver's seat.Press the open button of the window first, wait for all the windows to open, and then release the button. Then press the close button of the window, wait for the window to close completely, and then release the button.

4. It's very simple to set up the window with one click. First, lift the window lifting button up and keep the window glass up to the highest point. Of course, don't let your fingers in this process, and you have to stay for three seconds before letting go of your hand. After that, you need to press the window lifting button to keep the window low, or stay for three seconds.

5. First, lift the window lifting button up to let the window glass rise directly to the highest point. In this process, make sure that your fingers do not loosen, and then let go of your hand for about 2 to 5 seconds. Then, press the window lifting button again. This time, open the window to the lowest place. Just like the above operation, hold on for about 2 to 5 seconds before letting go, so that the automatic one-click lifting of the window is set successfully.

car window (car window) detailed information collection

The structure of the window is: car (inte structure) window (up and down Structure). The structure of the car window is: car (intache structure) window (upper and lower structure). Pinyin is: chē chuāng. The note is: ㄔㄜㄔㄨㄤ. The part of speech is: noun.

The car window is an important part of the whole car body, which is designed to meet the needs of lighting, ventilation and vision of drivers and passengers in the car. The installation positions of car windows are different according to the glass: front and rear wind windows, side windows and doors and windows.

The main purpose of opening the window on one side is to emit bad air in the car. Friends who smoke should feel it the most deeply. When smoking, open the window around you, and the second-hand smoke will be discharged quickly. Although it may be distributed to other places, opening the window in this way is undoubtedly the best effect! This is another tip for everyone.

The explanation of the window is the windows set on the four walls of the carriage. He Jingzhi's "Song of Lei Feng" 5: "I saw the peak straight up to the clouds in front of your car window." Li Ying's "Red Willow Collection · Baolan Road": "A burst of spring rain entered the car window, and Longzhong was repairing the canal to welcome the green.

What's wrong with the lifting of the glass of the car window

Too much dirt or foreign matter in the groove of the car glass guide; the window switch fails; the power supply of the window; the failure of the window lifting motor; the rubber aging and dust accumulation of the window glass .

The reason why the glass window of the car cannot be raised and lowered: one is that the glass glue strip is aging and deformed, and a new seal needs to be replaced. If it is not serious, talc powder should be applied to lubricate; one is that the glass lifting guide rail is too dirty and there is a foreign matter, which needs to be cleaned and grease applied; another is that the motor is fault or the battery is low, which needs Charge or replace the motor.

When the glass of the door and window rises or falls to the end, the circuit breaker is cut off for a period of time and then restored to the connected state. The circuit of the window lifter is aging or short-circuiting, resulting in the failure of the button.If there is a problem with the elevator itself, it must be replaced. It is recommended to go to the 4S store to replace it.

The reason for the failure of the window glass lifting is caused by the deformation or damage of the mud groove of the glass, the looseness of the screw fixing the elevator, the damage of the glass lifter or the deviation of the installation position of the guide rail. It is recommended not to tinker with it yourself. It is best to go to the 4S store for maintenance as soon as possible.

If some windows cannot be raised and lowered, the main reasons are as follows: the mud groove of the glass is deformed or damaged; the screw fixed by the elevator is loose; the glass elevator is damaged; the installation position of the guide rail is deviated. If all the windows can't be raised or lowered, it may be a line failure. It is still recommended to go to a professional store for maintenance.

Car window abnormal sound

When the car opens the window, there is a strange sound in the glass: When there is a lot of dust in the rubber guide groove of the car window, it leads to an increase in resistance and abnormal noise. To solve this situation, you need to clean the glass guide groove.

The sound of sand in the gap between the window glass and the adhesive strip of the car is caused by the friction between the sand and the glass; the aging of the window glass adhesive strip is made by the friction against the glass; it is made by the damage of the bearing of a component in the window lifting mechanism.

Usually, the sound of car glass lifting is caused by the accumulation of dust in the rubber groove of the window, and the more dirt, the resistance increases and the creaking sound. The solution is to clean the glass guide groove.

The abnormal noise in the car is the most common, and there are many parts where abnormal noise occurs, such as the loose installation of the trim panel, the looseness of the co-driver's glove box, the impact of the seat belt buckle, etc.Solution: Automatically reset or fill with soft objects to solve the problem.

The vibration of the window glass is generally caused by the drying of the seal of the new car or the hardening and aging caused by the lack of maintenance of the seal for a long time. Once driving on the bumpy road, the glass in the car will vibrate and make abnormal noise. The aging of the adhesive strip is the most likely cause of the abnormal sound of the window glass. If it is the abnormal noise of the new car, there is no need to replace the adhesive strip randomly.

How to open the window of a car? This is a science!

How to open the window? Open a small slit in the one-side window. Only one window can be opened, which can reduce noise, meet the circulation of air in the car, and let fresh air into the car. This is because when only a small slit is opened, the air pressure on the inner side of the window is higher than the outer side, and the air pressure inside the car will squeeze out the smoke.

Find the corresponding buttons. These four buttons correspond to four windows respectively. The operation process of opening the window is as follows: press the switch completely and release it to make the window down with one click; press or lift the switch again to stop moving the window. If it does not support single-key promotion. It needs to be pressed or lifted all the time.

This is a great knowledge to learn from the veteran driver. First of all, when the vehicle is driving, if all the windows are open, the air resistance of the vehicle will be greatly increased, thus increasing the fuel consumption of the vehicle. But if only one window is opened, the air resistance of the vehicle will be greatly reduced and gasoline will not be wasted. This is also the confusion of many car owners.

What is the use of the triangular window of a car?

1. Triangles are stable, and triangular windows play a good role in the stability of the whole frame of the car.Avoid excessive tilting of the front windshield, which causes corresponding blind spots for drivers. For the sake of beauty and contrast, this design is also adopted later. Achieve a coordinated aesthetic in visual effects.

2. The uses of the car triangular window are as follows: the first function is to expand the field of view and reduce the blind area.

3. The main role of the car triangular window is to avoid the side blind area caused by the excessive tilt of the front windshield, which can increase the driver's vision.

4. In addition, it can also appropriately reduce the manufacturing difficulty of rear moving windows. The glass size is divided into triangular windows, which makes the glass lifting more stable. C-pillar rear fixed triangular window: It mainly plays an aesthetic role, and also increases the lighting of the rear seat to meet the vision needs of passengers.

5. The role of the triangular window of the car is very important.Because the function of this triangular window is to broaden the driver's vision, thus reducing the blind area and facilitating the driver's observation of the surroundings. It plays a very important role in driving.