1.Prepare the system CD: If you don't have it, you can go to the computer store to buy it. You can buy the latest version of the CD of any system you need to install. If you have a burning optical drive, you can also download the ISO format system file on the Internet and burn it to the system CD.
2. Plug the made boot disk into the computer that cannot enter the system with a blue screen. Press the boot hotkey quickly and intermittently to enter the PE system. After entering the PE system, the reinstall tool will automatically pop up and perform the system installation. Wait for the system to be installed. After the installation of the system, a dialog box will pop up, as shown in the figure below.
3. Put the system installation CD into the optical drive and start the computer. During the startup process of the computer, press and hold the F2 key to enter the BIOS setting interface. The keys of different models of computers may be different. If you are not sure which button, you can restart the computer repeatedly and try to press and hold F1~F12.
4. Insert the system CD into the computer's optical drive, then press the power button of the computer and click the F12 key continuously. Some laptop models are F12 + FN keys.
5. The CD-ROM installation system first needs to set up the BIOS CD-ROM startup. The specific steps are as follows: After starting the computer, press the Del key on the keyboard in the place where "Press DEL to run Setup" is prompted: select the bios function, priority is the startup right, Set it as an optical drive. After setting, press F10 to save and exit.
6. Put the system installation CD into the optical drive, restart the computer, and enter the following interface: Next is to select the language version of the installation, which does not need to be changed according to the system default. Just click "Next" directly.
Prepare the system CD-ROM Prepare the system CD-ROM: If not, you can go to the computer store to buy it.
Put the XP installation CD before restarting, and press Enter when you see the word CD at the bottom of the screen. Only then can the light start, otherwise the computer will start to read the hard disk, that is, skip the light start to start from the hard disk.
There are two common methods for CD-ROM installation system. Quickly select the boot device and look at the screen prompts after turning on the power. Many computers support quick selection of the boot device. Press F8, F9 or F12 to call up the boot computer selection menu. Select the optical drive to start the installation.
To install from the disc, the BIOS should be set so that the system can be started from the disc.The method is as follows: BIOS settings start the computer. When the Press Del to Enter BIOS Setup prompt message is displayed on the screen, press the Del key on the keyboard to enter the motherboard BIOS setting interface.
Under normal power-on, put the CD into the optical drive and restart the computer (if it is abnormal, you can put it in after the power is turned on). Press DEL or other keys to enter the BIOS, and set the settings to start from DVD-F10-Y-Enter. After entering the PE interface, select "Install System" after entering the PE interface.
1. System CD-ROM: Operating System: Startup Settings: NotesThe steps to reinstall the system of this CD-ROM are as follows. Put the system CD-ROM on the laptop optical drive, and keep pressing the F1F1Esc and other hot keys to start after booting.
2. Steps to reinstall the CD-ROM system on the computer: System version: win7 system brand model: Lenovo thinkpadE14 How to reinstall the system with CD-ROM? First of all, we need to put the CD into our optical drive.
3. The reinstallation method is as follows: put it into the system CD, press F12 or Fn+F12 when restarting the notebook, select the DVD option in the pop-up boot menu, and press the car. Boot into the main menu of the CD-ROM, select [1] to install the system to the first partition. Go to this interface and perform the decompression operation of the system.
4. This is the operation: start the computer and put the CD in, manually restart the computer and keep pressing F8 (search on the Internet according to your own motherboard and press F keys) to enter the BIOS panel page, use the arrow keys to select the CD to start (that is, with the word DVD), press Enter, and a line of English appears on the page... Then, press any key to start the installation, and then follow the prompts.
5. After the configuration is set, press the "F10" key on the keyboard to save and exit. Then the computer will restart by itself, and the rest is to automatically install the system. The above is the step to set up the BIOS startup. The BIOS settings of each computer are different. You can refer to them. After learning, you can install the system with CD-ROM.
First, turn on the optical drive on the computer case and press the open button above directly. After opening, put the CD-ROM, and then close the optical drive.At this time, the computer will restart automatically. Before restarting the computer, enter bios first, and then set the boot method. That is, we need to start the system from the CD-ROM in order to install the system.
Under normal power-on, put the CD into the optical drive and restart the computer (if it is abnormal, you can put it in after the power is turned on). Press DEL or other keys to enter the BIOS, and set the settings to start from DVD-F10-Y-Enter. After entering the PE interface, select "Install System" after entering the PE interface.
Steps for the CD-ROM installation system Enter the BIOS settings to start up - insert the CD-Press DEL (desktop) or F2 key (most notebooks) or other keys to enter the BIOS-set the computer to start from the CD-ROM-F10-Y-Enter, and the computer will automatically restart to enter the system installation.After updating the driver and installing the system, just update the driver with the driver sprite.
Enter the BIOS to set the optical drive and insert the disc into the optical drive of the computer. First of all, press the Del key to enter the BIOS, select Advanced BIOS Features through the arrow keys on the keyboard, enter the BIOS setting interface, and select First Boot Device or (1st Boot Devic with the arrow key. E), select CDROM.
There are two common methods for CD-ROM installation system. Quickly select the boot device and look at the screen prompts after turning on the power. Many computers support quick selection of the boot device. Press F8, F9 or F12 to call up the boot computer selection menu. Select the optical drive to start the installation.
1. Step 1: Turn off the floppy drive. Step 2: Start the settings of the optical drive. Step 3: Save after return or press F10 directly to save. Step 4: Just select "YES or".Award BIOS motherboard optical drive boot settings Step 5: Enter Advanced BIOS Features.
2. How to reinstall the Windows 10 system on the CD: put the win10 CD, restart the computer, press F1F1Esc and other shortcut keys, select the DVD option, and press Enter. When this interface appears, press any key to start from CD or DVD. Boot from the CD-ROM to the win10 installation interface, select the language and input method, and confirm.
3. The first step is to place the system CD to the position of the computer optical drive. The second step is to wait for the successful reading of the CD, turn on the computer, and immediately tap the F12 startup hotkey, and the startup hotkeys of different computer motherboards are different, so you can tap them according to the following keys.
4. When we use CD-ROM to reinstall the system, we need two things, one is the system disk and the other is the driver CD-ROM. Two CDs must be used together. First, open the optical drive on the computer case and put it directly into the optical disc. At this time, the computer will restart automatically.
5. First of all, open the optical drive on the computer chassis and press the on-on button directly. After opening, put in the CD, and then close the optical drive. At this time, the computer will restart automatically. Before restarting the computer, enter bios first, and then set the boot method. That is, we need to start the system from the CD-ROM in order to install the system.
6. Insert the XP installation CD into the optical drive, restart, and see "CD...press any key" at the bottom of the screen..." When typing, press any key in time, otherwise the computer will skip the light and start from the hard disk.
1. There are two common ways to install the system with the CD-ROM. Quickly select the boot device and look at the screen prompts after turning on the power. Many computers support quick selection of the boot device. Press F8, F9 or F12 to call up the boot computer selection menu. Select the optical drive to start the installation.
2. Put in the XP installation CD before restarting, and press Enter when you see the CD word at the bottom of the screen. Only then can the light start, otherwise the computer will start to read the hard disk, that is, skip the light start to start from the hard disk.
3, the computer uses a CD-ROM to reinstall the system. The operation steps are as follows: prepare the system CD-ROM. Prepare the system CD-ROM: If not, you can buy it in the computer store.
4. Under normal power-on, put the CD-ROM into the optical drive and restart the computer (if it is abnormal, you can put it in after the power is turned on). Press DEL or other keys to enter the BIOS, and set the settings to start from DVD-F10-Y-Enter. After entering the PE interface, select "Install System" after entering the PE interface.
5. You can follow the following steps to install the system disk, put the system into the CD, buy a win7 CD, and put the system CD into the optical drive. Turn on the power in the BIOS settings, and then observe the prompts on the screen. Press "F2" to set the BIOS before starting the system.
6. ComputerSteps to reinstall the CD-ROM system: System version: win7 system brand model: Lenovo thinkpadE14 How to reinstall the system with CD-ROM? First of all, we need to put the CD into our optical drive.
USA trade data aggregation services-APP, download it now, new users will receive a novice gift pack.
1.Prepare the system CD: If you don't have it, you can go to the computer store to buy it. You can buy the latest version of the CD of any system you need to install. If you have a burning optical drive, you can also download the ISO format system file on the Internet and burn it to the system CD.
2. Plug the made boot disk into the computer that cannot enter the system with a blue screen. Press the boot hotkey quickly and intermittently to enter the PE system. After entering the PE system, the reinstall tool will automatically pop up and perform the system installation. Wait for the system to be installed. After the installation of the system, a dialog box will pop up, as shown in the figure below.
3. Put the system installation CD into the optical drive and start the computer. During the startup process of the computer, press and hold the F2 key to enter the BIOS setting interface. The keys of different models of computers may be different. If you are not sure which button, you can restart the computer repeatedly and try to press and hold F1~F12.
4. Insert the system CD into the computer's optical drive, then press the power button of the computer and click the F12 key continuously. Some laptop models are F12 + FN keys.
5. The CD-ROM installation system first needs to set up the BIOS CD-ROM startup. The specific steps are as follows: After starting the computer, press the Del key on the keyboard in the place where "Press DEL to run Setup" is prompted: select the bios function, priority is the startup right, Set it as an optical drive. After setting, press F10 to save and exit.
6. Put the system installation CD into the optical drive, restart the computer, and enter the following interface: Next is to select the language version of the installation, which does not need to be changed according to the system default. Just click "Next" directly.
Prepare the system CD-ROM Prepare the system CD-ROM: If not, you can go to the computer store to buy it.
Put the XP installation CD before restarting, and press Enter when you see the word CD at the bottom of the screen. Only then can the light start, otherwise the computer will start to read the hard disk, that is, skip the light start to start from the hard disk.
There are two common methods for CD-ROM installation system. Quickly select the boot device and look at the screen prompts after turning on the power. Many computers support quick selection of the boot device. Press F8, F9 or F12 to call up the boot computer selection menu. Select the optical drive to start the installation.
To install from the disc, the BIOS should be set so that the system can be started from the disc.The method is as follows: BIOS settings start the computer. When the Press Del to Enter BIOS Setup prompt message is displayed on the screen, press the Del key on the keyboard to enter the motherboard BIOS setting interface.
Under normal power-on, put the CD into the optical drive and restart the computer (if it is abnormal, you can put it in after the power is turned on). Press DEL or other keys to enter the BIOS, and set the settings to start from DVD-F10-Y-Enter. After entering the PE interface, select "Install System" after entering the PE interface.
1. System CD-ROM: Operating System: Startup Settings: NotesThe steps to reinstall the system of this CD-ROM are as follows. Put the system CD-ROM on the laptop optical drive, and keep pressing the F1F1Esc and other hot keys to start after booting.
2. Steps to reinstall the CD-ROM system on the computer: System version: win7 system brand model: Lenovo thinkpadE14 How to reinstall the system with CD-ROM? First of all, we need to put the CD into our optical drive.
3. The reinstallation method is as follows: put it into the system CD, press F12 or Fn+F12 when restarting the notebook, select the DVD option in the pop-up boot menu, and press the car. Boot into the main menu of the CD-ROM, select [1] to install the system to the first partition. Go to this interface and perform the decompression operation of the system.
4. This is the operation: start the computer and put the CD in, manually restart the computer and keep pressing F8 (search on the Internet according to your own motherboard and press F keys) to enter the BIOS panel page, use the arrow keys to select the CD to start (that is, with the word DVD), press Enter, and a line of English appears on the page... Then, press any key to start the installation, and then follow the prompts.
5. After the configuration is set, press the "F10" key on the keyboard to save and exit. Then the computer will restart by itself, and the rest is to automatically install the system. The above is the step to set up the BIOS startup. The BIOS settings of each computer are different. You can refer to them. After learning, you can install the system with CD-ROM.
First, turn on the optical drive on the computer case and press the open button above directly. After opening, put the CD-ROM, and then close the optical drive.At this time, the computer will restart automatically. Before restarting the computer, enter bios first, and then set the boot method. That is, we need to start the system from the CD-ROM in order to install the system.
Under normal power-on, put the CD into the optical drive and restart the computer (if it is abnormal, you can put it in after the power is turned on). Press DEL or other keys to enter the BIOS, and set the settings to start from DVD-F10-Y-Enter. After entering the PE interface, select "Install System" after entering the PE interface.
Steps for the CD-ROM installation system Enter the BIOS settings to start up - insert the CD-Press DEL (desktop) or F2 key (most notebooks) or other keys to enter the BIOS-set the computer to start from the CD-ROM-F10-Y-Enter, and the computer will automatically restart to enter the system installation.After updating the driver and installing the system, just update the driver with the driver sprite.
Enter the BIOS to set the optical drive and insert the disc into the optical drive of the computer. First of all, press the Del key to enter the BIOS, select Advanced BIOS Features through the arrow keys on the keyboard, enter the BIOS setting interface, and select First Boot Device or (1st Boot Devic with the arrow key. E), select CDROM.
There are two common methods for CD-ROM installation system. Quickly select the boot device and look at the screen prompts after turning on the power. Many computers support quick selection of the boot device. Press F8, F9 or F12 to call up the boot computer selection menu. Select the optical drive to start the installation.
1. Step 1: Turn off the floppy drive. Step 2: Start the settings of the optical drive. Step 3: Save after return or press F10 directly to save. Step 4: Just select "YES or".Award BIOS motherboard optical drive boot settings Step 5: Enter Advanced BIOS Features.
2. How to reinstall the Windows 10 system on the CD: put the win10 CD, restart the computer, press F1F1Esc and other shortcut keys, select the DVD option, and press Enter. When this interface appears, press any key to start from CD or DVD. Boot from the CD-ROM to the win10 installation interface, select the language and input method, and confirm.
3. The first step is to place the system CD to the position of the computer optical drive. The second step is to wait for the successful reading of the CD, turn on the computer, and immediately tap the F12 startup hotkey, and the startup hotkeys of different computer motherboards are different, so you can tap them according to the following keys.
4. When we use CD-ROM to reinstall the system, we need two things, one is the system disk and the other is the driver CD-ROM. Two CDs must be used together. First, open the optical drive on the computer case and put it directly into the optical disc. At this time, the computer will restart automatically.
5. First of all, open the optical drive on the computer chassis and press the on-on button directly. After opening, put in the CD, and then close the optical drive. At this time, the computer will restart automatically. Before restarting the computer, enter bios first, and then set the boot method. That is, we need to start the system from the CD-ROM in order to install the system.
6. Insert the XP installation CD into the optical drive, restart, and see "CD...press any key" at the bottom of the screen..." When typing, press any key in time, otherwise the computer will skip the light and start from the hard disk.
1. There are two common ways to install the system with the CD-ROM. Quickly select the boot device and look at the screen prompts after turning on the power. Many computers support quick selection of the boot device. Press F8, F9 or F12 to call up the boot computer selection menu. Select the optical drive to start the installation.
2. Put in the XP installation CD before restarting, and press Enter when you see the CD word at the bottom of the screen. Only then can the light start, otherwise the computer will start to read the hard disk, that is, skip the light start to start from the hard disk.
3, the computer uses a CD-ROM to reinstall the system. The operation steps are as follows: prepare the system CD-ROM. Prepare the system CD-ROM: If not, you can buy it in the computer store.
4. Under normal power-on, put the CD-ROM into the optical drive and restart the computer (if it is abnormal, you can put it in after the power is turned on). Press DEL or other keys to enter the BIOS, and set the settings to start from DVD-F10-Y-Enter. After entering the PE interface, select "Install System" after entering the PE interface.
5. You can follow the following steps to install the system disk, put the system into the CD, buy a win7 CD, and put the system CD into the optical drive. Turn on the power in the BIOS settings, and then observe the prompts on the screen. Press "F2" to set the BIOS before starting the system.
6. ComputerSteps to reinstall the CD-ROM system: System version: win7 system brand model: Lenovo thinkpadE14 How to reinstall the system with CD-ROM? First of all, we need to put the CD into our optical drive.
Sourcing opportunities filtered by HS code
author: 2024-12-23 21:28Agritech products HS code classification
author: 2024-12-23 21:09Packaging industry HS code references
author: 2024-12-23 20:53HS code-based cost-cutting strategies
author: 2024-12-23 20:06Global tender participation by HS code
author: 2024-12-23 19:08Global trade duty recovery strategies
author: 2024-12-23 21:34Global trade certificate verification
author: 2024-12-23 21:15How to analyze non-tariff measures
author: 2024-12-23 21:11Textile supply chain HS code mapping
author: 2024-12-23 20:36How to secure competitive freight rates
author: 2024-12-23 20:35415.98MB
Check357.78MB
Check314.73MB
Check332.64MB
Check985.37MB
Check735.54MB
Check221.58MB
Check628.75MB
Check892.76MB
Check447.31MB
Check512.45MB
Check886.49MB
Check764.24MB
Check428.89MB
Check948.54MB
Check379.19MB
Check835.97MB
Check179.89MB
Check727.32MB
Check714.22MB
Check591.86MB
Check563.22MB
Check762.22MB
Check676.92MB
Check392.48MB
Check485.59MB
Check299.75MB
Check768.49MB
Check367.86MB
Check696.46MB
Check332.16MB
Check446.93MB
Check852.52MB
Check593.34MB
Check878.63MB
Check179.21MB
CheckScan to install
USA trade data aggregation services to discover more
Netizen comments More
2486 HS code-driven supplier rationalization
2024-12-23 21:37 recommend
2425 Agriculture trade by HS code in Africa
2024-12-23 20:28 recommend
383 China HS code interpretation guide
2024-12-23 20:20 recommend
2857 How to align trade data with demand planning
2024-12-23 20:09 recommend
1540 Trade data for logistics companies
2024-12-23 19:41 recommend