1. System Composition The monitoring front-end is mainly composed of the former GloVIEW network video server, camera (protective cover, camera, lens, bracket), gimbal, decoder and other major equipment.
2. In the wireless monitoring system, the image system generally adopts the one-on-one working method or the point-to-point working method, that is, one transmitter corresponds to one microwave receiver, 10 monitoring points require 10 microwave transmitters, and 10 microwave receivers are needed at the receiving end. This is mainly determined by the display of the system image.
3. The system is advanced and reliable, and the cost is reasonable; it adopts the industry's advanced digital monitoring system, and the main equipment and software are mature imported products. According to the specific characteristics of the factory area, there are many trees, many small animals, etc.; it adopts a Japanese perimeter alarm detector with good anti-misalarm effect, which has strong anti-interference and low false positive rate.
2. OK. Installing cameras in the workshop does not violate the labor law and does not violate the privacy of employees.Enterprises install and use monitoring systems in the region within the scope of normal work.
3. Legal analysis: When installing monitors in the factory workshop, it is necessary to clarify whether the installation of cameras violates the privacy of workers. According to the Constitution and other laws, citizens' right to privacy is protected by law.
4. It is not illegal for the company to install cameras in the production line to monitor employees' work. To install monitors in the factory workshop, it is necessary to clarify whether the installation of cameras violates the privacy of workers. According to the Constitution and other laws, citizens' right to privacy is protected by law.
days, no matter how many cameras, before the automatic cover after 30 days, the current domestic technology is like this, and so is the public security bureau.
The canteen in the factory can still be monitored after a day, which is safe. The factory belongs to the general unit, and its installation and monitoring requirements for storage time are generally between 15 and 30 days. The one you said can be found within three days.
Different factories are different, 3 months at most and 10 days at least. It's very simple. If it is stolen but has not caught the "thief" for 10 days, the chance behind will be very small. In general, companies, factories and surveillance videos are generally kept for at least 10 days.
Generally, the monitoring content of factory cameras is determined by the size of the hard disk and the configuration of the saved video. The high-definition camera should need about 500M of space for an hour, that is, it only needs about 360G for a month. So it can be used for more than a year.
It depends on the size and settings of the hard disk.If it is included in the local sky network system, it is generally half a month to a month. But in fact, most of them are stored for more than 7 to 15 days due to the hard disk.
Under normal circumstances, a camera records continuously for 24 hours, which requires a hard disk capacity of about 0.3G-0.5G. Due to the limitation of storage space and storage cost, and the fact that the video recording in public places such as communities is multi-camera, the video will generally be automatically deleted about once a week.
*APAC special tariff HS code listings-APP, download it now, new users will receive a novice gift pack.
1. System Composition The monitoring front-end is mainly composed of the former GloVIEW network video server, camera (protective cover, camera, lens, bracket), gimbal, decoder and other major equipment.
2. In the wireless monitoring system, the image system generally adopts the one-on-one working method or the point-to-point working method, that is, one transmitter corresponds to one microwave receiver, 10 monitoring points require 10 microwave transmitters, and 10 microwave receivers are needed at the receiving end. This is mainly determined by the display of the system image.
3. The system is advanced and reliable, and the cost is reasonable; it adopts the industry's advanced digital monitoring system, and the main equipment and software are mature imported products. According to the specific characteristics of the factory area, there are many trees, many small animals, etc.; it adopts a Japanese perimeter alarm detector with good anti-misalarm effect, which has strong anti-interference and low false positive rate.
2. OK. Installing cameras in the workshop does not violate the labor law and does not violate the privacy of employees.Enterprises install and use monitoring systems in the region within the scope of normal work.
3. Legal analysis: When installing monitors in the factory workshop, it is necessary to clarify whether the installation of cameras violates the privacy of workers. According to the Constitution and other laws, citizens' right to privacy is protected by law.
4. It is not illegal for the company to install cameras in the production line to monitor employees' work. To install monitors in the factory workshop, it is necessary to clarify whether the installation of cameras violates the privacy of workers. According to the Constitution and other laws, citizens' right to privacy is protected by law.
days, no matter how many cameras, before the automatic cover after 30 days, the current domestic technology is like this, and so is the public security bureau.
The canteen in the factory can still be monitored after a day, which is safe. The factory belongs to the general unit, and its installation and monitoring requirements for storage time are generally between 15 and 30 days. The one you said can be found within three days.
Different factories are different, 3 months at most and 10 days at least. It's very simple. If it is stolen but has not caught the "thief" for 10 days, the chance behind will be very small. In general, companies, factories and surveillance videos are generally kept for at least 10 days.
Generally, the monitoring content of factory cameras is determined by the size of the hard disk and the configuration of the saved video. The high-definition camera should need about 500M of space for an hour, that is, it only needs about 360G for a month. So it can be used for more than a year.
It depends on the size and settings of the hard disk.If it is included in the local sky network system, it is generally half a month to a month. But in fact, most of them are stored for more than 7 to 15 days due to the hard disk.
Under normal circumstances, a camera records continuously for 24 hours, which requires a hard disk capacity of about 0.3G-0.5G. Due to the limitation of storage space and storage cost, and the fact that the video recording in public places such as communities is multi-camera, the video will generally be automatically deleted about once a week.
*Predictive models for trade demand
author: 2024-12-23 23:58How to analyze competitor shipping routes
author: 2024-12-23 23:28Global HS code repository access
author: 2024-12-23 21:50Refined sugar HS code identification
author: 2024-12-23 21:48Trade data-driven cost modeling
author: 2024-12-24 00:02Global trade data for currency hedging
author: 2024-12-23 21:24Analytical tools for trade diversification
author: 2024-12-23 21:24Mineral fuels HS code data analysis
author: 2024-12-23 21:23Predictive trade data modeling
author: 2024-12-23 21:23277.85MB
Check563.37MB
Check813.54MB
Check313.86MB
Check988.99MB
Check327.15MB
Check622.65MB
Check519.42MB
Check978.38MB
Check186.66MB
Check535.56MB
Check941.51MB
Check497.83MB
Check128.41MB
Check743.81MB
Check634.44MB
Check471.75MB
Check698.29MB
Check142.28MB
Check399.46MB
Check889.94MB
Check543.56MB
Check655.98MB
Check546.43MB
Check841.87MB
Check919.43MB
Check937.66MB
Check541.57MB
Check516.99MB
Check168.76MB
Check496.94MB
Check663.44MB
Check969.98MB
Check886.15MB
Check235.16MB
Check948.59MB
CheckScan to install
APAC special tariff HS code listings to discover more
Netizen comments More
1910 Global trade news aggregation
2024-12-23 23:54 recommend
1444 Trade finance data solutions
2024-12-23 23:00 recommend
1125 How to identify export-ready products
2024-12-23 21:42 recommend
490 Real-time trade document filing
2024-12-23 21:34 recommend
2528 HS code-based textile tariff scheduling
2024-12-23 21:29 recommend