Foton Resa pump truck adopts the new ISG engine Caitong dry and wet cylinder liner design to reduce the oxidation of oil and the small size. With NanoNetTM patented technology, the efficiency of fuel filtration and impurity filtration is as high as 97%, and the water separation effect is improved by 99%.Patented oil slow-release agent, which slows down oil acidification and reduces oxidation.
The engine is the heart of the car, providing power for the car to walk. The car is dynamic, economical and environmentally friendly. Simply put, the engine is an energy conversion mechanism, that is, the thermal energy of gasoline (diesel) is converted into mechanical energy by burning gas in a sealed cylinder, which is the most basic principle of the engine.
Platinkins engine is generally good. Relatively durable. When you buy a car, you must asquire the seller for instructions for the use of the vehicle and engine. Do it according to the manufacturer's requirements. Even if there is a problem, the manufacturer's after-sales service will solve it.
The engine oil and gear oil used need to be Foton five-star special oil, because the special oil can play a lubricating role, which is crucial to the maintenance of the engine.Non-special oil may make it difficult to rotate the inside of the engine, thus damaging the engine.
General engine maintenance includes the following aspects: 1. Replace the oil in time. Once the oil turns black, becomes thinner and contains sand, it should be stopped immediately. If the oil is not changed for a long time or the deteriorated oil is not used, it will not only fail to lubricate but also damage the engine.
Basically, it is maintained 3 times a year less than other pump trucks, and the maintenance cost saved is about 10,000 yuan. In terms of fuel consumption, the Resa pump engine automatically adapts to the pumping load, which can save 20% of energy. In addition, the fuel consumption of the car wash can also be reduced by 50%, which can save 50,000 yuan a year compared with other cars.
1. The engine model of Guoliu Automobile is 7NR. This engine is a 5L naturally aspirated engine with a maximum power of 81KW and a maximum torque of 138NM.
2. Add 5w30 engine oil to the national six cars. Specifically for the engine, 8 naturally aspirated engine, only original mineral oil can be used, or Huang Xili HX5, Jin Jiahu, etc.
3. SAIC Power E series engine adopts a combination of 10L and 12L gold large displacement, with a maximum torque of up to 2200N.m, which can burst out strong power, and the maximum burst pressure reaches 19MPa. The powerful technical support can make fuel burn more fully. The injection pressure of 200MPa The force makes the fuel atomization effect better.
4. The biggest feature of a naturally aspirated engine is smooth, stable, reliable and worry-free.Because the naturally aspirated engine has been developed for a long time, the internal structure is relatively simple, and the technology is relatively more mature, it is very worry-free to use in the later stage. As long as the car is maintained normally and the car is used in a standardized manner, the naturally aspirated engine can be used until the car is scrapped.
5. The difference is that the engine of the national six vehicle uses a ternary catalyst, and its performance will be better than that of the national five vehicle. There is no big difference in the power data between many countries 5 and countries 6, but there is a very big difference in the engine. The difference between engines is that hardware and software have changed.
The engines of Highlander 5 and Lexus 5 are the same, and both use Toyota's V6 2GR-FE engine. This engine has good fuel economy, and the power output is relatively smooth and has less jitter. It won the title of the top ten engines in 2007.
The engines of Highlander 5 and Lexus 5 are Toyota's V6 2GR-FE engines.The engine has good fuel economy, stable power output and small jitter, and won the title of Top Ten Engines in 2007. The maximum horsepower of the engine is 273, the maximum power is 201kw, and the maximum torque is 337N·m.
The engine of Highlander 5 and Lexus 5 is the same, using the Toyota V62GR-FE engine. This engine has good fuel economy, stable power output and small jitter, and won the title of the top ten engines of 2007. The engine has a maximum horsepower of 273 horsepower, a maximum power of 201kw and a maximum torque of 337N·m.
1. Large-disposture hydraulic system: Reduce the damping of the hydraulic system by selecting valve blocks and pipeline components with large flow diameter, reduce system heating, and achieve energy-saving effect.
2. First of all, increase the air intake by smoothing and expanding the intake and exhaust channel, increasing the cross-section of the engine valve, improving the compression ratio, changing the opening and closing time of the valve, etc. Secondly, the technical debugging of the intake and exhaust system can be carried out, and even the compressor system can be replaced.
3. Super energy-saving: engine adaptive pumping load energy-saving technology; idling car wash energy-saving technology, power system fuel saving; fuel consumption saving 50,000 yuan/year; whole vehicle matching fuel saving.
4. Maximum power refers to the maximum change in the energy of the circuit component in a unit time of the power supply, which is a physical quantity with size and positive and negative. It specifically refers to the maximum output power here.
5. The water pump needs to have the function of cooling the pump itself during the operation of the pump; the oil pump needs to be able to easily find and solve faults, and often requires self-detection, power-off, protection and other functions. There is also a big difference between the operation mode of the water pump and the oil pump.
Resa L9 crane adopts integrated manufacturing technology and is highly reliable: the factory is built with German technology level, and the engine and chassis research and development and manufacturing are integrated. High-quality products come from Sino-German advanced technology, and the integrated quality ensures reliable manufacturing.
Comparing quality, performance, price, etc., it seems that Resa is better, and Resa heavy machinery is increasingly recognized by industry insiders.Foton Resa Heavy Machinery is a global technology integrated company of Foton Automobile, using integrated research and development, integrated design, integrated manufacturing and integrated service system.
Resa Heavy Machinery adopts a large number of imported testing equipment and adopts the German quality management control system. In addition to meeting the national testing standards, crane products also adopt German testing standards. The driving performance, operation performance and structural strength of cranes have been tested, and the product quality reaches Made in Germany.
1. Very good. The pump truck of Foton Resa is independently developed and manufactured. His pump truck is created with advanced German technology, and has its own special Oman chassis with good technical performance. It uses the American Cummins engine, which has good power performance and is powerful and fuel-saving.
2. Resa is not bad. Zhucheng has built the top intelligent manufacturing base in China for Foton Resa, adopting standard box intelligent manufacturing and advanced innovation-driven technology. The Zhucheng Resa project has achieved the industry's first original box top loading, which maximizes the reliability and matching of the product.
3. Anqing Futian Resa has good R&D treatment. Perfect salary system: Anqing Foton Resa's research and development includes basic salary, performance salary and year-end bonus. Perfect salary adjustment mechanism: Anqing Futian Resa R&D has a salary adjustment at least once a year.
Resa L10 Guoliu vehicle pump, what engine does it use?Latin America export data visualization-APP, download it now, new users will receive a novice gift pack.
Foton Resa pump truck adopts the new ISG engine Caitong dry and wet cylinder liner design to reduce the oxidation of oil and the small size. With NanoNetTM patented technology, the efficiency of fuel filtration and impurity filtration is as high as 97%, and the water separation effect is improved by 99%.Patented oil slow-release agent, which slows down oil acidification and reduces oxidation.
The engine is the heart of the car, providing power for the car to walk. The car is dynamic, economical and environmentally friendly. Simply put, the engine is an energy conversion mechanism, that is, the thermal energy of gasoline (diesel) is converted into mechanical energy by burning gas in a sealed cylinder, which is the most basic principle of the engine.
Platinkins engine is generally good. Relatively durable. When you buy a car, you must asquire the seller for instructions for the use of the vehicle and engine. Do it according to the manufacturer's requirements. Even if there is a problem, the manufacturer's after-sales service will solve it.
The engine oil and gear oil used need to be Foton five-star special oil, because the special oil can play a lubricating role, which is crucial to the maintenance of the engine.Non-special oil may make it difficult to rotate the inside of the engine, thus damaging the engine.
General engine maintenance includes the following aspects: 1. Replace the oil in time. Once the oil turns black, becomes thinner and contains sand, it should be stopped immediately. If the oil is not changed for a long time or the deteriorated oil is not used, it will not only fail to lubricate but also damage the engine.
Basically, it is maintained 3 times a year less than other pump trucks, and the maintenance cost saved is about 10,000 yuan. In terms of fuel consumption, the Resa pump engine automatically adapts to the pumping load, which can save 20% of energy. In addition, the fuel consumption of the car wash can also be reduced by 50%, which can save 50,000 yuan a year compared with other cars.
1. The engine model of Guoliu Automobile is 7NR. This engine is a 5L naturally aspirated engine with a maximum power of 81KW and a maximum torque of 138NM.
2. Add 5w30 engine oil to the national six cars. Specifically for the engine, 8 naturally aspirated engine, only original mineral oil can be used, or Huang Xili HX5, Jin Jiahu, etc.
3. SAIC Power E series engine adopts a combination of 10L and 12L gold large displacement, with a maximum torque of up to 2200N.m, which can burst out strong power, and the maximum burst pressure reaches 19MPa. The powerful technical support can make fuel burn more fully. The injection pressure of 200MPa The force makes the fuel atomization effect better.
4. The biggest feature of a naturally aspirated engine is smooth, stable, reliable and worry-free.Because the naturally aspirated engine has been developed for a long time, the internal structure is relatively simple, and the technology is relatively more mature, it is very worry-free to use in the later stage. As long as the car is maintained normally and the car is used in a standardized manner, the naturally aspirated engine can be used until the car is scrapped.
5. The difference is that the engine of the national six vehicle uses a ternary catalyst, and its performance will be better than that of the national five vehicle. There is no big difference in the power data between many countries 5 and countries 6, but there is a very big difference in the engine. The difference between engines is that hardware and software have changed.
The engines of Highlander 5 and Lexus 5 are the same, and both use Toyota's V6 2GR-FE engine. This engine has good fuel economy, and the power output is relatively smooth and has less jitter. It won the title of the top ten engines in 2007.
The engines of Highlander 5 and Lexus 5 are Toyota's V6 2GR-FE engines.The engine has good fuel economy, stable power output and small jitter, and won the title of Top Ten Engines in 2007. The maximum horsepower of the engine is 273, the maximum power is 201kw, and the maximum torque is 337N·m.
The engine of Highlander 5 and Lexus 5 is the same, using the Toyota V62GR-FE engine. This engine has good fuel economy, stable power output and small jitter, and won the title of the top ten engines of 2007. The engine has a maximum horsepower of 273 horsepower, a maximum power of 201kw and a maximum torque of 337N·m.
1. Large-disposture hydraulic system: Reduce the damping of the hydraulic system by selecting valve blocks and pipeline components with large flow diameter, reduce system heating, and achieve energy-saving effect.
2. First of all, increase the air intake by smoothing and expanding the intake and exhaust channel, increasing the cross-section of the engine valve, improving the compression ratio, changing the opening and closing time of the valve, etc. Secondly, the technical debugging of the intake and exhaust system can be carried out, and even the compressor system can be replaced.
3. Super energy-saving: engine adaptive pumping load energy-saving technology; idling car wash energy-saving technology, power system fuel saving; fuel consumption saving 50,000 yuan/year; whole vehicle matching fuel saving.
4. Maximum power refers to the maximum change in the energy of the circuit component in a unit time of the power supply, which is a physical quantity with size and positive and negative. It specifically refers to the maximum output power here.
5. The water pump needs to have the function of cooling the pump itself during the operation of the pump; the oil pump needs to be able to easily find and solve faults, and often requires self-detection, power-off, protection and other functions. There is also a big difference between the operation mode of the water pump and the oil pump.
Resa L9 crane adopts integrated manufacturing technology and is highly reliable: the factory is built with German technology level, and the engine and chassis research and development and manufacturing are integrated. High-quality products come from Sino-German advanced technology, and the integrated quality ensures reliable manufacturing.
Comparing quality, performance, price, etc., it seems that Resa is better, and Resa heavy machinery is increasingly recognized by industry insiders.Foton Resa Heavy Machinery is a global technology integrated company of Foton Automobile, using integrated research and development, integrated design, integrated manufacturing and integrated service system.
Resa Heavy Machinery adopts a large number of imported testing equipment and adopts the German quality management control system. In addition to meeting the national testing standards, crane products also adopt German testing standards. The driving performance, operation performance and structural strength of cranes have been tested, and the product quality reaches Made in Germany.
1. Very good. The pump truck of Foton Resa is independently developed and manufactured. His pump truck is created with advanced German technology, and has its own special Oman chassis with good technical performance. It uses the American Cummins engine, which has good power performance and is powerful and fuel-saving.
2. Resa is not bad. Zhucheng has built the top intelligent manufacturing base in China for Foton Resa, adopting standard box intelligent manufacturing and advanced innovation-driven technology. The Zhucheng Resa project has achieved the industry's first original box top loading, which maximizes the reliability and matching of the product.
3. Anqing Futian Resa has good R&D treatment. Perfect salary system: Anqing Foton Resa's research and development includes basic salary, performance salary and year-end bonus. Perfect salary adjustment mechanism: Anqing Futian Resa R&D has a salary adjustment at least once a year.
Resa L10 Guoliu vehicle pump, what engine does it use?How to benchmark import export performance
author: 2024-12-24 00:57Agriculture trade data by HS code
author: 2024-12-23 23:18Asia trade corridors HS code mapping
author: 2024-12-23 22:59Drilling equipment HS code mapping
author: 2024-12-23 22:30Wine and spirits HS code verification
author: 2024-12-24 00:58Insightful trade route analysis
author: 2024-12-24 00:56Global trade data for currency hedging
author: 2024-12-24 00:52HS code-based scenario planning for exports
author: 2024-12-24 00:40Beverage industry HS code lookups
author: 2024-12-23 23:02317.88MB
Check931.62MB
Check444.71MB
Check556.59MB
Check451.73MB
Check145.19MB
Check366.47MB
Check935.62MB
Check172.75MB
Check242.95MB
Check668.19MB
Check923.55MB
Check482.76MB
Check971.13MB
Check815.85MB
Check719.33MB
Check467.23MB
Check823.21MB
Check938.42MB
Check522.66MB
Check919.55MB
Check429.83MB
Check861.75MB
Check287.86MB
Check196.76MB
Check942.84MB
Check311.68MB
Check272.65MB
Check679.47MB
Check413.14MB
Check839.61MB
Check397.77MB
Check466.35MB
Check799.47MB
Check863.64MB
Check572.95MB
CheckScan to install
Latin America export data visualization to discover more
Netizen comments More
2527 Global trade claim management
2024-12-24 00:51 recommend
529 How to analyze non-tariff measures
2024-12-24 00:39 recommend
668 How to align trade strategy with data
2024-12-24 00:32 recommend
2869 HS code correlation with quality standards
2024-12-24 00:27 recommend
937 How to reduce shipping delays with data
2024-12-23 23:23 recommend