The problem is caused by the oxidation of the memory stick or the gold finger of the graphics card or the poor contact of the slot, which leads to the inability to turn on the computer.
Restart the computer: Try to simply restart the computer. Sometimes, the system may encounter temporary problems, which can be solved by restarting.Check the hardware connection: make sure that all hardware devices (such as keyboards, mice, monitors, etc.) are connected correctly. Sometimes, incorrect hardware connections may cause the computer to fail to start.
It can't be turned on. There are too many reasons. Memory, hard disk, motherboard and other hardware are all possible. The system boot damage will also be the same. You can troubleshoot it yourself. It's not all about finding someone to check for you. As long as the hardware is not broken, the system will be reinstalled at worst.
If you can enter the safe mode smoothly, you can solve the reason why you can't enter the desktop by checking and fixing the problem. Restore/repair the system: If the above method is not effective, you can try to use the recovery function pre-installed on the computer (such as restoring partition or restoring CD).
Suspect that the power supply is faulty, replace the original power supply with a good power supply, and then turn on the power test. The display appears a power-on screen, confirming that it is a power failure.After replacing an ATX power supply, install the operating system and use the test software to copy the machine for testing. Everything is normal and troubleshooting.
1. If the method cannot solve it, we can enter the safe mode to restore the system.
2. Then run the anti-virus software. If there is a virus, it may be caused by the virus. Restart the computer after the antivirus. If it is still abnormal, you need to reinstall the operating system.
3. In this case, the system upgrade file may be damaged and the system upgrade failed. You can start up and press f9 or f10 to enter the recovery mode to restore to before the upgrade, or restore to the factory settings.
4. The computer model is different. After entering, there are 2 kinds of recovery modes. One is to associate your own, which is very simple. Just choose to reset.
5. Solution Press f2 to enter bios when booting, and then enter the boot menu and set your hard disk as the first boot item. In addition, this situation is a hardware problem. You can turn on the computer host after cleaning the dust.
6. The laptop can't enter the system when it is turned on. You can try to eliminate viruses and Trojan horses in the following ways. You can use anti-virus software to check the computer's anti-virus! Check the temperature of the CPU and graphics card. If the temperature of the CPU and graphics card is too high, it often causes a protective automatic restart. Dust the fan, oil or replace the new fan.
CD-ROM installation of reinstalling the system: This is what many friends often do when they can't enter the computer. Of course, the premise is that you must have an optical drive and an installation CD-ROM.
Then run the anti-virus software. If there is a virus, it may be caused by a virus. After the antivirus, restart the computer. If it is not normal, you need to reinstall the operating system.
It is recommended to press F8 to enter the safe mode to see if you can enter the safe mode. If you can enter the safe mode, it is recommended to uninstall the previously installed software or update, check the virus, update the driver, and turn off the unused boot item test. If you can't enter the safe mode to restore the default settings of bios, it is recommended to enter the bios to restore the default settings test.
HS code-based cargo insurance optimization-APP, download it now, new users will receive a novice gift pack.
The problem is caused by the oxidation of the memory stick or the gold finger of the graphics card or the poor contact of the slot, which leads to the inability to turn on the computer.
Restart the computer: Try to simply restart the computer. Sometimes, the system may encounter temporary problems, which can be solved by restarting.Check the hardware connection: make sure that all hardware devices (such as keyboards, mice, monitors, etc.) are connected correctly. Sometimes, incorrect hardware connections may cause the computer to fail to start.
It can't be turned on. There are too many reasons. Memory, hard disk, motherboard and other hardware are all possible. The system boot damage will also be the same. You can troubleshoot it yourself. It's not all about finding someone to check for you. As long as the hardware is not broken, the system will be reinstalled at worst.
If you can enter the safe mode smoothly, you can solve the reason why you can't enter the desktop by checking and fixing the problem. Restore/repair the system: If the above method is not effective, you can try to use the recovery function pre-installed on the computer (such as restoring partition or restoring CD).
Suspect that the power supply is faulty, replace the original power supply with a good power supply, and then turn on the power test. The display appears a power-on screen, confirming that it is a power failure.After replacing an ATX power supply, install the operating system and use the test software to copy the machine for testing. Everything is normal and troubleshooting.
1. If the method cannot solve it, we can enter the safe mode to restore the system.
2. Then run the anti-virus software. If there is a virus, it may be caused by the virus. Restart the computer after the antivirus. If it is still abnormal, you need to reinstall the operating system.
3. In this case, the system upgrade file may be damaged and the system upgrade failed. You can start up and press f9 or f10 to enter the recovery mode to restore to before the upgrade, or restore to the factory settings.
4. The computer model is different. After entering, there are 2 kinds of recovery modes. One is to associate your own, which is very simple. Just choose to reset.
5. Solution Press f2 to enter bios when booting, and then enter the boot menu and set your hard disk as the first boot item. In addition, this situation is a hardware problem. You can turn on the computer host after cleaning the dust.
6. The laptop can't enter the system when it is turned on. You can try to eliminate viruses and Trojan horses in the following ways. You can use anti-virus software to check the computer's anti-virus! Check the temperature of the CPU and graphics card. If the temperature of the CPU and graphics card is too high, it often causes a protective automatic restart. Dust the fan, oil or replace the new fan.
CD-ROM installation of reinstalling the system: This is what many friends often do when they can't enter the computer. Of course, the premise is that you must have an optical drive and an installation CD-ROM.
Then run the anti-virus software. If there is a virus, it may be caused by a virus. After the antivirus, restart the computer. If it is not normal, you need to reinstall the operating system.
It is recommended to press F8 to enter the safe mode to see if you can enter the safe mode. If you can enter the safe mode, it is recommended to uninstall the previously installed software or update, check the virus, update the driver, and turn off the unused boot item test. If you can't enter the safe mode to restore the default settings of bios, it is recommended to enter the bios to restore the default settings test.
How to simplify export documentation
author: 2024-12-24 00:12How to reduce customs compliance risk
author: 2024-12-23 22:49Global trade indices and benchmarks
author: 2024-12-23 22:49Pharma active ingredients HS code checks
author: 2024-12-23 22:36Global import export data subscription
author: 2024-12-23 22:20HS code-driven demand planning
author: 2024-12-24 00:45Top international trade research methods
author: 2024-12-24 00:40Pharmaceutical trade analytics platform
author: 2024-12-23 23:10HS code-based commodity chain analysis
author: 2024-12-23 22:26429.84MB
Check965.68MB
Check272.69MB
Check662.83MB
Check245.49MB
Check232.24MB
Check355.26MB
Check249.21MB
Check686.68MB
Check573.62MB
Check252.64MB
Check596.75MB
Check741.62MB
Check232.77MB
Check367.14MB
Check494.69MB
Check958.28MB
Check942.85MB
Check379.75MB
Check833.63MB
Check278.63MB
Check782.67MB
Check466.77MB
Check483.88MB
Check755.17MB
Check469.24MB
Check353.16MB
Check361.57MB
Check582.69MB
Check112.22MB
Check721.17MB
Check548.81MB
Check494.33MB
Check557.96MB
Check395.99MB
Check299.35MB
CheckScan to install
HS code-based cargo insurance optimization to discover more
Netizen comments More
2377 Real-time HS code duty updates
2024-12-24 00:18 recommend
1000 APAC special tariff HS code listings
2024-12-23 23:49 recommend
98 Locating specialized suppliers by HS code
2024-12-23 23:09 recommend
2904 Meat and poultry HS code references
2024-12-23 22:44 recommend
76 Container-level shipment data
2024-12-23 22:21 recommend