How to simplify export documentation

List of contents of this article:

• 1,How to simplify export documentation How to enter the BIOS interface and reinstall the system settings on the HP desktop computer.
• 2, How to reinstall the HP compaq515 system?
• 3, What key does HP press to reinstall the system
• 4, How to reinstall the system on an HP computer requires detailed steps
• 5,How to reinstall the system of HP Dark Night Elf

How to enter the BIOS interface and reinstall the system settings on the HP desktop computer.

1. After power-on, press and hold the Esc key in the upper left corner of the keyboard until the following interface is displayed.Move the cursor to the ComputerSetup (F10) menu and return.

2. The entry method of the HP laptop is: hold down the F2 key when the computer is turned on, and the system will automatically enter the BIOS setting interface. The entry method of HP desktop computer is: keep pressing the Delete button when the computer is turned on, and the system will automatically enter the BIOS setting interface.

3. Turn on the HP 300-15 computer until the HP LOGO appears and quickly press ESC to enter the next step. 2. After ESC, press F10 on the keyboard, and HP 300-15 will enter the BIOS interface. 3. After the relevant bios setting is completed, press F10 to exit and save, the system will automatically restart, and the BIOS setting will be completed.

4. HP computers need to press different buttons to enter the BIOS, depending on your HP computer model and operating system version. The following are some common keys to enter the BIOS: F1: On some older HP computers, press the F1 key to enter the BIOS settings.

How to reinstall the HP compaq515 system?

Is it a laptop? Like ordinary computers, you can reinstall it with a CD-ROM, or copy the file (ghost version) on the system disk directly into the computer and run it.

I) Install with WINPE in the Ghost system CD, some of which can also be successful. ( II) After setting SATA, install it again. Start the computer and press the DEL key to enter the BIOS setup program.

If you don't know much about computers, it is recommended that you don't use a USB flash drive to install the operating system. It is recommended that you try to find a regular pure installation version of the system installation CD. When the HP logo appears, press F9 to select the optical drive to start the optical drive to boot and install the operating system.

After you make the above settings and back up the data, you insert the system installation CD into the optical drive, restart the computer, press the "F9" key repeatedly to enter the startup item settings after power-on, and select boot from the optical drive (e.g. DVDCD-ROM or OpticalDisk Drive), Then you can boot the system CD from the optical drive to install the system.

What key does HP press to reinstall the system

1. HP needs to press the F10 key to reinstall the system. According to the official HP guide, you need to press the F10 key to enter the BIOS setting interface when reinstalling the system. In the BIOS setting interface, you need to enter the startup option, uncheck the UEFI boot order, and make the machine default to traditional startup.

2. Press F2 to enter bios for HP notebooks to set up and then reinstall the system. You can follow the steps below to install the system: put the system CD into the optical drive. Turn on the power and observe the prompts on the screen. Press F2 to set the BIOS before starting the system. Set the startup mode. This setting screen is the BIOS setting.

3. The following are the startup buttons for reinstalling the system of different computer brands: desktops: Lenovo, HP, Acer, Shenzhou, Fangzheng, Tsinghua Tongfang, Haier boot buttons are F12; Dell is ESC; ASUS and BenQ are F8.

4. Click F11 continuously when booting to enter the system recovery interface, and the "Select Keyboard Layout" interface will appear. It is recommended to select "Microsoft Pinyin Simple".

5. The method of reinstalling the system on HP laptop: set up the boot USB flash drive: hp computer has a special function, that is, press the Esc key, and the startup menu (startup menu) will appear as shown in the figure: the function of each key has its own description.

6. HP Shadow Elf 1st generation can install win7. The installation steps are as follows. Open Dr. Han Installation Master on the desktop and click "Start Installation" system to start environmental detection. Choose from the various system files provided and find the appropriate win7 system file for download and installation. The steps are as follows: Insert the installed USB flash drive into the USB interface of the computer and press the power button.

How to reinstall the system on an HP computer requires detailed steps

Click the ESC key on the keyboard immediately after giving the HP computer. At this time, the laptop will immediately enter the Menu interface 2, and then click the F10 key to enter the system settings of COMS 3, and then we need to enter the motherboard Setup, but Then use the mouse to click System Configur several times in a row.

Step 1: Prepare the system installation media. First, you need to prepare a Windows system installation CD or USB flash drive. If your computer does not have an optical drive, you can use an external optical drive or choose to make a USB boot disk.

How to reinstall the system of HP laptop: set up the boot USB flash drive: HP computer has a special function, which is, press the Esc key, and the startup menu will appear as shown in the figure: the function of each key has its own description.

Generally, press F2 to enter the system to install the hard disk to start. You can try it yourself. Some are not allowed to install the USB disk. First, enter the bois to set up the USB disk system to install.

How to reinstall the system of HP Dark Night Elf

1. Select the USB disk boot system to start the USB disk boot system. HP Shadow Elf notebook can enter the BIOS by directly pressing F10 by turning on the power-on button. After pressing the power-on button, press the ESC button directly continuously until the picture changes, and then press the button to enter the BIOS settings.

2. After installation, you can officially enter the win8 system desktop and use the win8 system to your heart's content.

3. HP Shadow Elf 5omen15-dc1068tx notebook bios setting tutorial: After power-on, press the F10 key to enter the BIOS settings. There is no Chinese option for this motherboard. Select Advanced, SATAController selects SATA1-2.

4. Restart the computer, press the F8 key as soon as it is displayed, select "Last Correct Configuration" and then press Enter. If the "last correct configuration" does not solve the problem, choose to enter safe mode, repair the system files with relevant software, and check for viruses and Trojans.