The mixed gas is too thick: When the engine mixed gas is too thick, the phenomenon is: it is difficult to accelerate after starting, and the engine runs unevenly; the exhaust pipe smokes black smoke, and the engine is accompanied by a strange sound; the engine power decreases and the fuel consumption increases.Most of these are related to carbon accumulation, filter blockage, etc., and generally do not need to be overhauled.
When the vehicle starts, the valve will lack the sealing and lubrication of the oil, resulting in a sizzling sound. This is a normal situation. Second, the abnormal sound made by the belt when starting. In this case, it is necessary to check whether there is a problem with the belt in time. If there is an abnormal sound of the belt, first check.
The engine temperature is too low: When the car is cold started, the engine temperature is too low to work normally. At this time, it is normal to have some abnormal sounds. This situation is normal. Just wait for a while and wait for the engine temperature to rise to the normal level.
The abnormal noise during the cold start of the engine may be caused by engine oil dirt, improper oil viscosity, excessive engine carbon accumulation, carbon tank solenoid valve failure, secondary injection system failure, electric vacuum air pump, etc.
1. The engine claw pad is aging. The claw pad plays the role of supporting the engine. After aging, it will make a strange sound when the car starts.
2. There are many reasons for the abnormal sound when starting the car.Including low engine temperature, thermal expansion of automobile ternary catalyst, gearbox failure, engine belt or chain wear, etc.
3. There are many reasons for abnormal noise when the car starts, including low engine temperature, thermal expansion of the car's ternary catalyst, gearbox failure, engine belt or chain wear, etc. The engine temperature is too low: When the car is cold started, the engine temperature is too low to work normally. At this time, it is normal to have some abnormal noise.
4. The reasons for the abnormal sound of the car starting and the solution are as follows: there is a sharp chirping sound at the moment the car starts.
5. Once the fuel of the car is insufficient, the engine will make a rattling sound when it is ignited, but it will also occur that it cannot start normally. It must be checked.Whether the fuel is sufficient or not, this problem is very easy to solve. You only need to add fuel in time.
1. Try to check the coolant, the oil pressure is too high or too low, check the oil pressure gauge, and there may be a problem with the ignition time setting, which will also lead to such symptoms. As for others, it may be an internal problem with the engine, such as EGR valve blockage.
2. Caused by engine carbon accumulation, because the old engine oil is getting thinner and thinner, more and more carbon accumulates. When the oil is thin, it is easy to spee the oil, resulting in more and more carbon accumulation and loss of a lot of power. When replacing with new oil, the engine cannot adapt to the viscosity of the oil, which may increase the speed, resulting in loud engine noise.
3. The engine foot mat is aging, resulting in the inability to reduce the vibration. The engine and the frame are softly connected, and the foot mat is separated from the engine and the frame. Over time, the rubber rubber sleeve of the foot mat slowly ages and loses its original shock absorption effect, and the noise will naturally become louder. The design of the vehicle itself leads to loud noise.
Worldwide trade corridor mapping-APP, download it now, new users will receive a novice gift pack.
The mixed gas is too thick: When the engine mixed gas is too thick, the phenomenon is: it is difficult to accelerate after starting, and the engine runs unevenly; the exhaust pipe smokes black smoke, and the engine is accompanied by a strange sound; the engine power decreases and the fuel consumption increases.Most of these are related to carbon accumulation, filter blockage, etc., and generally do not need to be overhauled.
When the vehicle starts, the valve will lack the sealing and lubrication of the oil, resulting in a sizzling sound. This is a normal situation. Second, the abnormal sound made by the belt when starting. In this case, it is necessary to check whether there is a problem with the belt in time. If there is an abnormal sound of the belt, first check.
The engine temperature is too low: When the car is cold started, the engine temperature is too low to work normally. At this time, it is normal to have some abnormal sounds. This situation is normal. Just wait for a while and wait for the engine temperature to rise to the normal level.
The abnormal noise during the cold start of the engine may be caused by engine oil dirt, improper oil viscosity, excessive engine carbon accumulation, carbon tank solenoid valve failure, secondary injection system failure, electric vacuum air pump, etc.
1. The engine claw pad is aging. The claw pad plays the role of supporting the engine. After aging, it will make a strange sound when the car starts.
2. There are many reasons for the abnormal sound when starting the car.Including low engine temperature, thermal expansion of automobile ternary catalyst, gearbox failure, engine belt or chain wear, etc.
3. There are many reasons for abnormal noise when the car starts, including low engine temperature, thermal expansion of the car's ternary catalyst, gearbox failure, engine belt or chain wear, etc. The engine temperature is too low: When the car is cold started, the engine temperature is too low to work normally. At this time, it is normal to have some abnormal noise.
4. The reasons for the abnormal sound of the car starting and the solution are as follows: there is a sharp chirping sound at the moment the car starts.
5. Once the fuel of the car is insufficient, the engine will make a rattling sound when it is ignited, but it will also occur that it cannot start normally. It must be checked.Whether the fuel is sufficient or not, this problem is very easy to solve. You only need to add fuel in time.
1. Try to check the coolant, the oil pressure is too high or too low, check the oil pressure gauge, and there may be a problem with the ignition time setting, which will also lead to such symptoms. As for others, it may be an internal problem with the engine, such as EGR valve blockage.
2. Caused by engine carbon accumulation, because the old engine oil is getting thinner and thinner, more and more carbon accumulates. When the oil is thin, it is easy to spee the oil, resulting in more and more carbon accumulation and loss of a lot of power. When replacing with new oil, the engine cannot adapt to the viscosity of the oil, which may increase the speed, resulting in loud engine noise.
3. The engine foot mat is aging, resulting in the inability to reduce the vibration. The engine and the frame are softly connected, and the foot mat is separated from the engine and the frame. Over time, the rubber rubber sleeve of the foot mat slowly ages and loses its original shock absorption effect, and the noise will naturally become louder. The design of the vehicle itself leads to loud noise.
How to adapt to shifting trade policies
author: 2024-12-24 01:05Agricultural machinery HS code lookups
author: 2024-12-24 00:31How to comply with origin rules
author: 2024-12-23 23:59Exotic textiles HS code classification
author: 2024-12-23 23:42Agricultural machinery HS code lookups
author: 2024-12-23 23:09HS code correlation with export refunds
author: 2024-12-24 00:44How to minimize supply chain disruptions
author: 2024-12-23 23:45Global trade intelligence for investors
author: 2024-12-23 23:25Trade compliance automation tools
author: 2024-12-23 23:25399.52MB
Check639.73MB
Check961.81MB
Check213.94MB
Check883.67MB
Check241.75MB
Check114.95MB
Check624.68MB
Check768.81MB
Check355.29MB
Check271.19MB
Check465.62MB
Check521.53MB
Check866.15MB
Check793.28MB
Check865.83MB
Check477.44MB
Check649.88MB
Check634.19MB
Check463.32MB
Check541.36MB
Check262.21MB
Check683.16MB
Check326.91MB
Check113.91MB
Check677.63MB
Check861.94MB
Check625.41MB
Check135.43MB
Check438.76MB
Check267.41MB
Check427.44MB
Check516.34MB
Check534.97MB
Check113.67MB
Check375.39MB
CheckScan to install
Worldwide trade corridor mapping to discover more
Netizen comments More
839 Trade data analysis for small businesses
2024-12-24 00:16 recommend
1297 Customs duty optimization strategies
2024-12-24 00:01 recommend
2883 Global trade disruption analysis
2024-12-23 23:58 recommend
2436 Global trade metadata enrichment
2024-12-23 23:16 recommend
2847 HS code harmonization in NAFTA region
2024-12-23 22:56 recommend